Tripp Lite
Tripp Lite P007-003-15RR 14 AWG 125 V 15 A NEMA 5-15P to IEC 60320 C13 3 ft rotating flat plug video accessory
A 3 ft heavy-duty power cord with a 360-degree rotating flat plug connects C14 equipment to NEMA 5-15R outlets at 125 V and 15 A
- Heavy-gauge 14 AWG wire supports 15 A loads for servers and networking gear
- 360-degree rotating flat plug fits crowded outlets without blocking neighbours
- Right-angle design runs parallel to the wall for tight spaces behind furniture
- Three-foot length reduces cable clutter and tripping hazards in rack setups
- NEMA 5-15P to IEC 60320 C13 connectors suit monitors, printers, UPS and PDUs
Power Cable for High-Draw Equipment
This 14 AWG cord is built for computers, servers, monitors, printers and network gear that need a heavier-gauge connection. It links a C14 inlet to a standard NEMA 5-15R wall outlet, surge protector, UPS or PDU. The three-foot length keeps runs short inside racks or on desks. It is rated for 125 V AC at 15 A.
Three Feet of Headroom for Dense Racks
At three feet the cord reaches from a floor PDU to a low-mounted server without leaving coils that block airflow. The 14 AWG conductors handle the 15 A rating continuously, so it will not be the bottleneck for a fully loaded power supply. Runs longer than three feet would need a separate extension or a longer cord.
Rotating Flat Plug for Tight Clearances
The NEMA 5-15P plug rotates 360 degrees and sits flat against the outlet, letting you plug in behind furniture or inside crowded power strips without blocking adjacent sockets. The right-angle IEC 60320 C13 connector runs parallel to the device chassis, reducing strain where rear clearance is only a few centimetres. Black jacket matches typical data-centre colour coding.
Highlights
- Heavy-gauge 14 AWG wire supports 15 A loads for servers and networking gear
- 360-degree rotating flat plug fits crowded outlets without blocking neighbours
- Right-angle design runs parallel to the wall for tight spaces behind furniture
- Three-foot length reduces cable clutter and tripping hazards in rack setups
- NEMA 5-15P to IEC 60320 C13 connectors suit monitors, printers, UPS and PDUs
Specifications
No published specifications for this item yet.
Questions about this item
Will the NEMA 5-15P plug fit a standard US wall outlet without an adapter?
The NEMA 5-15P plug is the standard three-prong type used on 125 V AC circuits in North America and connects directly to a wall outlet or surge protector.
How can I confirm the 14 AWG cable is delivering full power to my server?
The cord is rated for 15 A at 125 V AC; if the connected equipment powers on and runs without the plug or cable becoming warm, the connection is performing correctly.
Does the package include the IEC 60320 C13 end already attached, and is any separate connector needed?
The cable arrives as a single 3 ft assembly with the NEMA 5-15P plug on one end and the IEC 60320 C13 connector moulded on the other; no extra parts are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



