Tripp Lite
Tripp Lite P002-18N-2R C14 to 2x NEMA 5-15R 13A 125V 16 AWG 18 in 46 cm video accessory
Y-splitter connects a C14 inlet to two NEMA 5-15R outlets at 13 A, 125 V using 16 AWG cable over 18 in
- Splits one C14 inlet into two NEMA 5-15R outlets
- Handles up to 13 A at 125 V AC for reliable power delivery
- 16 AWG conductors support the rated current safely
- Compact 18 in (46 cm) length reduces cable clutter
- Compatible with computers, PDUs, printers, scanners, servers and UPS units
Power Cord Y Splitter
This Tripp Lite Y splitter converts a single C14 inlet into two NEMA 5-15R outlets, letting you power two devices from one PDU or UPS receptacle. It is rated for 13 A at 125 V and uses 16 AWG conductors in an 18 in (46 cm) black cable. The moulded connectors and strain reliefs are built for continuous duty in racks, wiring closets or desktop clusters.
Suited for dual-device racks.
Installers who need to feed a server and a monitor, or a printer and a scanner, from one C14 source will find the short 1.50 ft reach keeps cable management tidy. Builders planning to run equipment that exceeds 13 A, or who require a longer run to distant outlets, should look at a different cord set.
The 13 A 125 V rating decides fit
Every connected device must stay within the 13 A limit on the shared C14 feed, so the splitter is only appropriate for low-power peripherals. If your combined load is higher, this part cannot be used safely.
Highlights
- Splits one C14 inlet into two NEMA 5-15R outlets
- Handles up to 13 A at 125 V AC for reliable power delivery
- 16 AWG conductors support the rated current safely
- Compact 18 in (46 cm) length reduces cable clutter
- Compatible with computers, PDUs, printers, scanners, servers and UPS units
Specifications
| Brand | Tripp Lite |
|---|---|
| Shipping weight | 0.18 kg |
| Package size | 254 × 178 × 25 mm |
Questions about this item
Does the splitter ship with the two NEMA 5-15R outlets attached, or do I need to buy them separately?
The Y-splitter arrives fully assembled with one C14 plug and two NEMA 5-15R receptacles moulded on the 18 in cord, so no extra parts are required.
When should I choose the 16 AWG, 13 A version instead of a heavier gauge?
Select this 16 AWG model when the combined load of the two devices stays at or below 13 A at 125 V; it suits typical desktop, printer, scanner or server power supplies.
What does the 13 A rating mean once I plug two devices into the splitter?
The 13 A limit applies to the total current drawn through the single C14 inlet, so the sum of both connected devices must not exceed 13 A at 125 V.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



