We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black three-foot power cord with C13 plug and locking C14 connector

Tripp Lite

Tripp Lite P-Lock C13 to C14 Power Cord 14 AWG 15A 250V 3 ft Black

SKU CH-KACK-W46SG

Heavy-duty 14 AWG cable with P-Lock C14 connector prevents accidental disconnection in racks, rated 15 A at 250 V and 3 ft long

  • Secure locking P-Lock C14 prevents accidental disconnection in dense racks
  • Heavy-duty 14 AWG wire supports 15 A at 250 V for high-power devices
  • Three-foot length reduces cable clutter in tight rack enclosures
  • Compatible with Eaton G4 and newer PDUs featuring C13 and C39 outlets
  • Powers servers, switches, UPS units and workstations reliably

C13 to P-Lock C14 cable

This power cord connects equipment with a standard C13 inlet to a P-Lock C14 outlet on a PDU or UPS. The locking mechanism prevents accidental disconnection in dense rack environments. It is intended for servers, switches, workstations and similar network devices that require a secure 15 A connection.

14 AWG heavy-gauge construction

The cord uses 14 AWG conductors rated for 15 A at 250 V, supporting both 120 V and 230 V supplies. The heavier gauge reduces voltage drop compared with thinner cables, making it suitable for high-power server and switch deployments. The three-foot length minimises excess slack in crowded cabinets.

Three-foot rack-optimised reach

At 0.9 m the cable spans the short distance between a device and an adjacent PDU without creating loops that block airflow. It comfortably handles 15 A continuous loads on compatible Eaton G4 and newer P-Lock outlets. It will not fit standard non-locking C14 receptacles, so buyers needing a universal C14 plug should choose a different cord.

Highlights

  • Secure locking P-Lock C14 prevents accidental disconnection in dense racks
  • Heavy-duty 14 AWG wire supports 15 A at 250 V for high-power devices
  • Three-foot length reduces cable clutter in tight rack enclosures
  • Compatible with Eaton G4 and newer PDUs featuring C13 and C39 outlets
  • Powers servers, switches, UPS units and workstations reliably

Specifications

No published specifications for this item yet.

Questions about this item

Will the 14 AWG conductors need replacement after extended high-current use?

The 14 AWG wire is rated for 15 A continuous duty at 250 V, so it does not require scheduled replacement under normal operating conditions.

What limits continuous loading on the P-Lock C14 connector?

The connector is rated for 15 A at 120 V or 230 V; sustained loads above that level will trip upstream protection first.

Does the cord generate noticeable heat when powering a server rack all day?

At its rated 15 A the 14 AWG conductors run warm but within design limits, and the three-foot length keeps resistive losses minimal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.