We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal box with SFP+ ports and LED indicators

Tripp Lite

Tripp Lite N786-MDC-SFPSFP 10 Gb SFP+ Mode Converter 1310/1550 nm 80 km

SKU CH-ZQK4-663G4 MPN N786-MDC-SFPSFP

Converts multimode fiber to singlemode SFP+ links reaching 80 km with LED diagnostics and selectable 1.25–10.3 Gbps speeds

  • Compatible BrandTripp Lite series
  • Device TypeMedia Converter
  • Converts multimode to singlemode fiber for 80 km reach
  • Extends 10 Gb SFP+ links up to 50 miles
  • LEDs show link status and signal diagnostics instantly
  • DIP switches select 1.25–8.5 Gbps or 10.3 Gbps operation
  • Includes 12 V 1 A power supply with four international plug adapters

10 Gb SFP+ Mode Converter for Long-Haul Fiber

The Tripp Lite N786-MDC-SFPSFP converts multimode fiber signals to singlemode at 10 Gbps, extending network links up to 80 kilometers. It accepts SFP and SFP+ transceivers operating at 1310 nm and 1550 nm wavelengths. Network engineers use it to bridge distance limits in high-density data center migrations without replacing existing transceivers.

External Power Supply with International Adapters

The unit ships with a 100-240V AC input supply delivering 12V at 1A through a 1.4 meter cord and four regional plug adapters. Power draw is rated at 0.35A on the mains side. A metal enclosure provides passive heat dissipation with no internal fan, resulting in silent operation suitable for rack or desktop placement.

DIP Switch Speed Selection and Diagnostic LEDs

Side-mounted DIP switches toggle the operating range between 1.25 to 8.5 Gbps and a fixed 10.3 Gbps mode to match transceiver capabilities. LEDs report link status, signal diagnostics, power state and fiber break detection at a glance. A printed Quick Start Guide covers initial configuration and LED interpretation for rapid deployment.

Highlights

  • Converts multimode to singlemode fiber for 80 km reach
  • Extends 10 Gb SFP+ links up to 50 miles
  • LEDs show link status and signal diagnostics instantly
  • DIP switches select 1.25–8.5 Gbps or 10.3 Gbps operation
  • Includes 12 V 1 A power supply with four international plug adapters

Specifications

BrandTripp Lite
ModelN786-MDC-SFPSFP
Part NumberN786-MDC-SFPSFP
Compatible BrandTripp Lite series
Device TypeMedia Converter
Shipping weight0.64 kg
Package size241 × 196 × 76 mm

Questions about this item

How do I install the Tripp Lite N786-MDC-SFPSFP and which step is often missed?

Connect the external power supply using one of the four international plug adapters, insert compatible SFP+ transceivers into both slots, and link the fiber cables; the step often missed is setting the DIP switch to 10.3 Gbps when your link requires that speed.

What maintenance or replacement will the Tripp Lite N786-MDC-SFPSFP need later?

The SFP+ transceivers inserted into the converter are the components most likely to need replacement if a link fails or wavelengths change; the converter itself has no user-serviceable parts and the 12V 1A power supply should be checked if the power LED stays off.

What limit appears first on the Tripp Lite N786-MDC-SFPSFP under sustained use?

The 80 km distance limit set by the 1310 nm and 1550 nm wavelength pairing is reached before any speed ceiling; the DIP switch must match the transceiver rate up to 10.3 Gbps to avoid a throughput bottleneck.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.