We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black metal box with RJ45 port and SC fiber connector, external power brick included

Tripp Lite

Tripp Lite N785-P01-SC-SM1 SFP transceiver 1310nm 12.4mi PoE+

SKU CH-YK22-V00QS MPN N785-P01-SC-SM1

Extends a Gigabit Ethernet link up to 12.4 miles over single-mode SC fiber while delivering 48 VDC PoE+ power to edge devices

  • Device TypeTransceiver
  • Wavelength1310nm
  • Ports10/100/1000Base-T
  • Max Distance12.4 Mile
  • Transfer Rate1 Gbps
  • FeatureExtends your copper Gigabit Ethernet network connection up t
  • Extends copper Gigabit Ethernet up to 12.4 mi over singlemode SC fiber
  • Delivers 48 VDC power and 1000 Mbps data to edge PoE+ devices
  • RJ45 jack auto-negotiates MDI/MDIX for flexible device bridging
  • Supports both full- and half-duplex operation modes
  • Includes external 100-240V power supply with 3.6 ft cord and NEMA 5-15P plug

Gigabit Ethernet fibre extension

The Tripp Lite N785-P01-SC-SM1 is a media converter that extends a copper Gigabit Ethernet link up to 12.4 miles over single-mode fibre with SC connectors. It delivers both 1000 Mbps data and 48 VDC power to a remote PoE+ device through a single fibre run. An external power supply with a 3.6 ft cord and NEMA 5-15P plug is included.

Installers needing remote PoE+ power

This unit suits installers who must power a PoE+ camera, access point or other edge device beyond the 100 metre copper limit using single-mode fibre. It is not for networks that require multimode fibre, LC connectors or distances greater than 20 km. Buyers without a compatible single-mode fibre link should look at other solutions.

1310 nm single-mode SC transceiver

The transceiver operates at a 1310 nm wavelength over duplex single-mode fibre with SC connectors and supports a maximum reach of 20 km (12.4 mi). This wavelength and connector combination decides whether the module matches the existing fibre plant. Verify the link budget and fibre type before purchase.

Highlights

  • Extends copper Gigabit Ethernet up to 12.4 mi over singlemode SC fiber
  • Delivers 48 VDC power and 1000 Mbps data to edge PoE+ devices
  • RJ45 jack auto-negotiates MDI/MDIX for flexible device bridging
  • Supports both full- and half-duplex operation modes
  • Includes external 100-240V power supply with 3.6 ft cord and NEMA 5-15P plug

Specifications

BrandTripp Lite
ModelN785-P01-SC-SM1
Device TypeTransceiver
Wavelength1310nm
Ports10/100/1000Base-T
Max Distance12.4 Mile
Transfer Rate1 Gbps
FeatureExtends your copper Gigabit Ethernet network connection up to 20 km (12.4 mi.) over SC fiber optic cable with the addition of PoE.
- Extends power (48 VDC) + data (1000 Mbps) to any edge PoE+ device
- Supports singlemode fiber optic cable with SC connectors up to 20 km (12.4 mi.)
- RJ45 jack supports auto-MDI/MDIZ to bridge various network devices
- Supports both full- and half-duplex operation
- Works in tandem with Tripp Lite N785-INT-SC-SM (sold separately)
Package ContentsN785-P01-SC-SM1 Transceiver/Media Converter
External Power Supply with 3.6 ft. Cord and NEMA 5-15P Plug (Input: 100-240V, 50/60 Hz, 1.5A; Output: 48V 1.25A)
Owner's Manual
Shipping weight0.77 kg
Package size249 × 215 × 215 mm

Questions about this item

Does the external power supply generate noticeable heat or fan noise when the transceiver runs continuously?

The included 48 VDC 1.25 A external supply has no fan and is rated for 100-240 V, 50/60 Hz input, so it runs silently with minimal warmth.

What cabling and connectors must I already have to link this transceiver to my network?

You need single-mode fiber with SC duplex connectors for the 12.4 mi uplink and a standard Cat5e or better RJ-45 patch cord for the 10/100/1000Base-T port.

Will this transceiver work with my existing 100 Mbps switches and legacy PoE devices?

The RJ-45 port auto-negotiates 10/100/1000 Mbps and supports half- or full-duplex, so it interoperates with older Fast Ethernet gear while still delivering 48 VDC PoE+ power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.