We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal box with ST ports and status LEDs

Tripp Lite

Tripp Lite N784-MDC-1STST SFP Transceiver 100 Mbps ST 1310 nm 10 km

SKU CH-B3HY-60E2P MPN N784-MDC-1STST

Converts multimode ST fiber to singlemode ST fiber at 100 Mbps for distances up to 10 km with diagnostic LEDs and a rugged metal housing

  • Compatible BrandTripp Lite series
  • Max Distance100 Mbps
  • Transfer Rate10 Km
  • Package ContentsN784-MDC-1STST 100 Mb ST Mode Converter, External power supp
  • Converts multimode to singlemode fiber for 10 km reach
  • 1310 nm wavelength supports 100 Mbps network links
  • LEDs show link status, signal diagnostics and power state
  • Rugged metal housing operates from 0 to 70 °C
  • Includes 5 V 2 A supply with 1.4 m cord and four plug adapters

Network mode converter

The Tripp Lite N784-MDC-1STST converts multimode ST fiber signals to singlemode ST signals, extending network links up to 10 km. It operates at 100 Mbps using a 1310 nm wavelength and includes an external power supply with international plug adapters. The rugged metal housing supports operating temperatures from 0 to 70 degrees Celsius.

Distance and speed limits

The converter is rated for 100 Mbps transfer rate over a maximum distance of 10 km (6.2 mi) on singlemode fiber. It requires compatible ST connectors on both ends and a 5V 2A power input from the supplied adapter. Signal diagnostics are provided by side-mounted LEDs showing link status, speed, and power.

Capacity and headroom

This unit comfortably handles point-to-point mode conversion for legacy 100 Mbps networks needing extended reach between buildings or cabinets. It runs out of headroom when bandwidth requirements exceed 100 Mbps or when multimode-to-multimode or singlemode-to-singlemode conversion is needed. Buyers needing Gigabit speeds or different connector types must select alternative equipment.

Highlights

  • Converts multimode to singlemode fiber for 10 km reach
  • 1310 nm wavelength supports 100 Mbps network links
  • LEDs show link status, signal diagnostics and power state
  • Rugged metal housing operates from 0 to 70 °C
  • Includes 5 V 2 A supply with 1.4 m cord and four plug adapters

Specifications

BrandTripp Lite
ModelN784-MDC-1STST
Part NumberN784-MDC-1STST
Compatible BrandTripp Lite series
Max Distance100 Mbps
Transfer Rate10 Km
Package ContentsN784-MDC-1STST 100 Mb ST Mode Converter, External power supply (Input: 100240V, 50/60 Hz, 0.35A; Output: 5V 2A) with 4.5 ft. (1.4 m) cord, (4) International plug adapters (North America, Europe, U.K., Australia), Quick Start Guide
Shipping weight0.50 kg
Package size244 × 132 × 61 mm

Questions about this item

Which Tripp Lite mode converter model should I choose for 100 Mbps multimode-to-singlemode conversion?

The N784-MDC-1STST is the specific model designed for this exact conversion at 100 Mbps over ST connectors.

What does the 10 km distance rating mean when the converter is installed in my network?

It means the converted singlemode signal can reliably reach switches or hubs up to 10 kilometers (6.2 miles) away over standard fiber.

What interface does the ST connector use and what speed does it cap at?

The ST connectors operate at 1310 nm wavelength and support a maximum transfer rate of 100 Mbps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.