Extreme Networks
Extreme Networks Silhouette Ceiling Mounting Bracket 14 or 18
$23.99
0.00028868BTC
In stock
TRENDnet
TRENDnet TEW-740APBO2K 10 dBi N300 outdoor PoE access point bridge kit
A pre-configured kit of two outdoor PoE access points with 10 dBi directional antennas creates a 300 Mbps point-to-point wireless bridge over 2.4 GHz
- Wireless Data RatesUp to 300Mbps
- Frequency BandFCC: 2.412 - 2.462 GHz ETSI: 2.412 – 2.472 GHz IC: 2.412 - 2
- WAN Ports1 x 10/100Mbps LAN1 port (proprietary PoE max. cable length
- InterfaceRJ-45
- StandardsIEEE 802.3 IEEE 802.3u IEEE 802.1d IEEE 802.1p IEEE 802.1Q I
- ChannelsFCC: 1-11 ETSI: 1-13
- Pre-configured pair creates an instant point-to-point link
- 10 dBi directional antenna focuses signal for long-range building-to-building connections
- PoE injector delivers power and data over a single cable up to 60 m
- IP67-rated enclosure withstands dust, rain and temperatures from -22 °C to 60 °C
- Wireless N300 provides up to 300 Mbps on the 2.4 GHz band
Pre-configured outdoor bridge kit
The TRENDnet TEW-740APBO2K bundles two 10 dBi Wireless N300 outdoor PoE access points that arrive pre-configured for point-to-point bridging. Each unit operates on the 2.4 GHz band with data rates up to 300 Mbps and supports AP, WDS, Repeater, and Wireless Client modes. The IP67 rated housing with integrated directional sector antenna is built for building-to-building links in harsh environments.
Power and cabling checks
Verify that the proprietary PoE injectors supplied with the kit can reach each mounting location within the 60 m (197 ft.) maximum cable length for the LAN1 port. The injectors require a 100 - 220V AC supply and deliver 12V DC at 1A over a single Ethernet cable. Ensure both sites have a grounded AC outlet and that the included grounding wires are attached to the mounting hardware for lightning protection.
Sustained load behaviour
Under continuous traffic the radios transmit at up to 28 dBm (FCC) or 10.6 dBm (CE) with receiver sensitivity of -69 dBm at 300 Mbps. The units are rated for operation from -22° to 60° C with humidity up to 99 % non-condensing. Maximum power consumption is 6.6 W per device, so thermal output remains modest inside the sealed enclosure during extended high-throughput sessions.
Highlights
- Pre-configured pair creates an instant point-to-point link
- 10 dBi directional antenna focuses signal for long-range building-to-building connections
- PoE injector delivers power and data over a single cable up to 60 m
- IP67-rated enclosure withstands dust, rain and temperatures from -22 °C to 60 °C
- Wireless N300 provides up to 300 Mbps on the 2.4 GHz band
Specifications
| Wireless Data Rates | Up to 300Mbps |
|---|---|
| Frequency Band | FCC: 2.412 - 2.462 GHz ETSI: 2.412 – 2.472 GHz IC: 2.412 - 2.462 GHz |
| WAN Ports | 1 x 10/100Mbps LAN1 port (proprietary PoE max. cable length 60m (197 ft.)) 1 x 10/100Mbps LAN2 port |
| Interface | RJ-45 |
| Standards | IEEE 802.3 IEEE 802.3u IEEE 802.1d IEEE 802.1p IEEE 802.1Q IEEE 802.1X IEEE 802.11d IEEE 802.11e IEEE 802.11f IEEE 802.11h IEEE 802.11i IEEE 802.11b IEEE 802.11g IEEE 802.11k IEEE 802.11n (2.4GHz up to 300Mbps) IEEE 802.11r |
| Channels | FCC: 1-11 ETSI: 1-13 |
| Antenna | 10 dBi internal sector antenna |
| Transmitted Power | 802.11b: FCC: 26 dBm (max.) / CE: 10.4 dBm (max.) / IC: 26 dBm (max.) @ 11Mbps 802.11g: FCC: 25 dBm (max.), CE: 10.5 dBm (max.) / IC: 25 dBm (max.) @ 54Mbps 802.11n: FCC: 28 dBm (max.), CE: 10.6 dBm (max.) / IC: 28 dBm (max.) @ 150Mbps 802.11n: FCC: 27 dBm (max.), CE: 10.6 dBm (max.) / IC: 27 dBm (max.) @ 300Mbps |
| Receiver Sensitivity | 802.11b: -88 dBm (typical) @ 11Mbps 802.11g: -74 dBm (typical) @ 54Mbps 802.11n: -71 dBm (typical) @ 150Mbps 802.11n: -69 dBm (typical) @ 300Mbps |
| Modulation | 802.11b: DBPK, DQPSK, CCK with DSSS 802.11g/n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM |
| Power Supply | Input: 100 - 220V AC, 50/60Hz, 0.5A Output: 12V DC, 1A proprietary/passive PoE injector Max. Consumption: 6.6W |
| Brand | TRENDnet |
| Model | TEW-740APBO2K (Version v3.0R) |
| Temperature | -22° - 60° C (-7.6° - 140° F) |
| Humidity | Max. 99% non-condensing |
| Dimensions | 7.60" x 4.60" x 2.40" |
| Weight | 0.67 lb. |
| Features | Wireless N300 building-to-building networking (2.4 GHz) Supports Access Point (AP), Wireless Distribution System (WDS), Repeater, and Wireless Client modes IP67 rated housing Built in 10 dBi directional sector antenna |
| Package Contents | 2 x TEW-740APBO Quick Installation Guide Proprietary/Passive PoE injectors Power adapters (12V DC, 1A) Grounding wires Mounting hardware 2 x Rubber seals |
| Shipping weight | 1.81 kg |
| Package size | 305 × 254 × 152 mm |
Questions about this item
Does the kit include everything needed to mount and power both access points?
Yes. The box contains two TEW-740APBO units, two proprietary PoE injectors, two 12 V 1 A power adapters, grounding wires, mounting hardware and two rubber seals. A Quick Installation Guide is also included.
What is the difference between the two access points in the bundle?
There is no difference; both units are identical TEW-740APBO v3.0R devices with a built-in 10 dBi sector antenna, IP67-rated housing and the same 300 Mbps 2.4 GHz radio. The kit simply provides two of them for a point-to-point link.
What real-world throughput can I expect from the 300 Mbps link?
The 300 Mbps figure is the maximum PHY rate under ideal conditions. Actual throughput will be lower due to protocol overhead, distance, interference and the 10/100 Mbps Ethernet ports on each unit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
RUCKUS WIRELESS
RUCKUS WIRELESS 10G-SFPP-LR-S SFP+ transceiver module 10 GigE
$233.99
0.0028157BTC
In stock
