TRENDnet AO-202DH3-US-2 Dual Monitor KVM Switch 2 PC 2 Monitor 4K@60Hz
A dual-monitor KVM switch controls two computers from one keyboard, mouse and two displays at up to 4K@60Hz with four USB 3.0 ports and a wired remote
- TypeUSB
- PC ConnectorsUsb
- Console ConnectorsUsb
- Computer ConnectionsUSB 2.0
- Monitor Connections4 Ports
- PC SelectionPush Buttons
- Control two PCs with one keyboard, mouse and dual monitors
- 4K at 60 Hz or 2K at 144 Hz for sharp visuals
- Four USB 3.0 ports share peripherals at 5 Gbps
- Switch via front button or 4.92 ft wired remote
- Driver-free plug-and-play with HDMI 2.1 and DP 1.4 cables included
Dual Monitor KVM for Two Computers
This TRENDnet KVM switch lets a single keyboard, mouse and dual-monitor setup control two computers. It supports extended or copy display modes and is aimed at users who need to manage two systems side by side without extra peripherals. The unit ships with two 1.5 m USB 3.0 cables and a 4.92 ft wired remote for desk-side switching.
Sustained Operation at 4K 60 Hz
The switch maintains 4K resolution at 60 Hz or 2K at 144 Hz across both displays during continuous use. Four USB 3.0 ports provide up to 5 Gbps bandwidth for attached devices, while the driver-free design avoids software overhead that can degrade performance over long sessions. Each computer must supply both HDMI and DP connections from the same graphics source for stable operation.
HDMI 2.1 and DP 1.4 Cable Requirement
Reliable 4K 60 Hz dual-monitor switching depends on using HDMI 2.1 and DisplayPort 1.4 cables kept as short as practical. Systems lacking both port types on a single discrete graphics card cannot meet this requirement, so the switch is not suitable for those configurations.
Highlights
- Control two PCs with one keyboard, mouse and dual monitors
- 4K at 60 Hz or 2K at 144 Hz for sharp visuals
- Four USB 3.0 ports share peripherals at 5 Gbps
- Switch via front button or 4.92 ft wired remote
- Driver-free plug-and-play with HDMI 2.1 and DP 1.4 cables included
Specifications
| Brand | TRENDnet |
|---|---|
| Series | 10 cm |
| Model | AO-202DH3-US-2 |
| Part Number | AO-202DH3-US-2 |
| Type | USB |
| PC Connectors | Usb |
| Console Connectors | Usb |
| Computer Connections | USB 2.0 |
| Monitor Connections | 4 Ports |
| PC Selection | Push Buttons |
| Monitors Supported | VGA DDC, DDC2, DDC2B |
| Audio Features | Offers audio and microphone switching |
| USB Features | with USB support |
| SplitterOnly | VGA Monitor Splitter only |
| Application | Usb |
| Features | Usb, 2 |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
Questions about this item
Does the AO-202DH3-US-2 generate noticeable heat or fan noise when switching between two PCs all day?
The unit has no fan and draws minimal power through its USB 3.0 upstream ports, so it runs silently and stays cool during continuous operation.
Which cables and ports must each computer already provide for the AO-202DH3-US-2 to function?
Every connected PC needs one HDMI 2.1 output, one DisplayPort 1.4 output and one free USB 3.0 Type-A port; the required 1.5 m USB 3.0 cables are included.
Will the switch work properly if one of my older PCs only has HDMI 2.0 and DisplayPort 1.2 ports?
The manufacturer recommends HDMI 2.1 and DP 1.4 cables for full 4K 60 Hz performance; older ports may limit resolution or refresh rate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



