TRENDnet 7235 4K@60Hz HDMI KVM Switch 2 PCs 1 Monitor 3 USB 3.0 Ports
Controls two computers from one 4K@60Hz monitor with three USB 3.0 ports and wired remote switching
- TypeUSB
- PC ConnectorsPlug In
- Console ConnectorsPlug In
- Computer ConnectionsUSB 2.0
- Monitor Connections4 Ports
- PC SelectionPush Buttons
- Controls two PCs with one 4K 60 Hz monitor and shared peripherals
- Three USB 3.0 ports let you share keyboard, mouse and other devices
- Switch instantly via front button or wired remote control
- EDID adaptation keeps the display stable when changing sources
- No external power adapter or driver software required
Two-PC HDMI KVM with USB 3.0
The TRENDnet 7235 lets you control two computers from a single 4K@60Hz monitor, keyboard and mouse. Three USB 3.0 ports share peripherals such as drives, printers or scanners between both systems. Switching is handled by a wired remote or front-panel buttons, with no hotkey option. The unit draws power from the connected computers and requires no external adapter.
Replaces manual cable swapping
Instead of unplugging HDMI and USB leads each time you change machines, this switch keeps everything connected and selects the active PC in seconds. The jump is worth it when you regularly move between a desktop and a laptop, or between work and personal rigs, and want a single monitor and USB set-up. It does not suit users who need hotkey switching, ultra-wide display support or more than two computer ports.
Limited to HDMI 4K@60Hz and USB 2.0 host links
Video tops out at 4K@60Hz, so higher refresh rates or 8K signals will not pass through. The computer connections use USB 2.0, which caps peripheral bandwidth below what USB 3.0 devices can deliver. Switching a 4K@60Hz screen typically blanks the display for five to seven seconds, while 1080p@60Hz takes roughly three to five seconds. No external power input means the switch cannot boost signal strength for long cable runs.
Highlights
- Controls two PCs with one 4K 60 Hz monitor and shared peripherals
- Three USB 3.0 ports let you share keyboard, mouse and other devices
- Switch instantly via front button or wired remote control
- EDID adaptation keeps the display stable when changing sources
- No external power adapter or driver software required
Specifications
| Brand | TRENDnet |
|---|---|
| Series | HDMI 1 Monitor 2 Computers |
| Model | 7235 |
| Part Number | 7235 |
| Type | USB |
| PC Connectors | Plug In |
| Console Connectors | Plug In |
| Computer Connections | USB 2.0 |
| Monitor Connections | 4 Ports |
| PC Selection | Push Buttons |
| Monitors Supported | VGA DDC, DDC2, DDC2B |
| Audio Features | Offers audio and microphone switching |
| Power Features | Requires no additional power supply |
| USB Features | with USB support |
| SplitterOnly | VGA Monitor Splitter only |
| Application | Plug In, Wired |
| Features | Plug In, Wired, 2, IP00 |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
Questions about this item
What are the physical dimensions of the TRENDnet 7235 to confirm it fits on my desk?
The unit measures 14.33in W x 12.83in H x 9.06in D, so verify your available surface area against those figures before purchase.
How do I connect two PCs and one monitor to the 7235, and what is the common wiring mistake?
Plug each PC's HDMI output and USB 2.0 cable into the corresponding computer ports, then connect the single monitor to the console HDMI port; the frequent error is swapping the HDMI and USB cables between the two computer ports, which breaks switching.
Which parts of the 7235 may need replacement after extended use?
The HDMI and USB 3.0 cables linking the PCs to the switch are the consumable items; the switch itself draws power from the USB 2.0 computer connections and has no internal battery or fan to service.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



