TREGASKISS
TREGASKISS 403-14-35-25 Threaded Contact Tip 0.035in Welding
Threaded copper contact tip for 0.035 in MIG wire, standard duty, fits TOUGH LOCK nozzles
- TypeTools
- MaterialHAWA
- Copper construction ensures excellent electrical conductivity
- Threaded connection provides secure fit in TOUGH LOCK systems
- Standard duty rating suits everyday MIG welding tasks
- 035 in wire compatibility matches common welding applications
- Compatible with multiple Tregaskiss gun and diffuser series
TREGASKISS Threaded Contact Tip 0.035in
This TREGASKISS 403-14-35-25 is a copper contact tip built for MIG welding guns using the TOUGH LOCK series. It accepts a maximum wire diameter of 0.035 in and threads into compatible diffusers such as the 404-14 and 404-18. The tip suits standard-duty applications on TGX, Tough Gun, BTB and Clean Air systems.
Welders running 0.035in wire on TOUGH LOCK guns
Shops running 0.035in wire on Tregaskiss TOUGH LOCK compatible guns will find this tip a direct fit for standard-duty MIG work. It is not for flux-cored wires larger than 0.035in, nor for guns that use slip-on or press-fit tips. Operations needing heavy-duty or high-amperage tips should select a different duty rating.
0.035in maximum wire diameter decides fit
The single specification that decides whether this is the right part is the 0.035in maximum wire diameter. If your welding wire matches this size and your gun uses TOUGH LOCK threaded tips with a 0.25in outside diameter, the 403-14-35-25 will seat correctly in 404-14 or 404-18 diffusers.
Highlights
- Copper construction ensures excellent electrical conductivity
- Threaded connection provides secure fit in TOUGH LOCK systems
- Standard duty rating suits everyday MIG welding tasks
- 035 in wire compatibility matches common welding applications
- Compatible with multiple Tregaskiss gun and diffuser series
Specifications
| Type | Tools |
|---|---|
| Brand | TREGASKISS |
| Material | HAWA |
Questions about this item
Which gun or diffuser do I need to fit this 403-14-35-25 threaded contact tip?
It fits Tregaskiss TOUGH LOCK guns and gas diffusers numbered 404-14 or 404-18.
Will this tip work with the same 0.035 in wire I use in older standard-duty tips?
Yes, it is rated for a maximum wire diameter of .035 in and standard duty use.
How can I confirm the tip is seated correctly after installation?
The threaded connection should bottom out firmly in the TOUGH LOCK diffuser with no visible gap.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
