TREGASKISS
TREGASKISS 401-81-62 Slip-On Nozzle 3/8" Heavy Duty Tapered welding
A slip-on, heavy-duty tapered copper nozzle for MIG welding with TOUGH LOCK series guns
- TypeTools
- Heavy-duty copper construction withstands high-heat MIG welding
- Slip-on connection fits TOUGH LOCK and compatible gun series
- Tapered bore directs shielding gas for cleaner welds
- Self-insulated design eliminates separate insulator component
- Compatible with diffuser numbers 404-26 and 404-32
TREGASKISS 401-81-62 Slip-On Nozzle
The TREGASKISS 401-81-62 is a heavy-duty tapered nozzle built for MIG welding guns using the TOUGH LOCK system. It fits professional fabricators and automotive shops that run compatible water-cooled or air-cooled torches daily. Buyers needing a different bore profile or a thread-on connection will not be served by this model.
5/8 in Bore with 1/8 in Stick-Out
The 5/8 inch bore diameter and fixed 1/8 inch tip stick-out deliver consistent gas coverage on standard MIG (GMAW) jobs in fabrication and manufacturing. The self-insulated copper construction handles heavy-duty cycles, but the dimensions are fixed; operators who require adjustable recess or a larger bore for high-deposition wire must look elsewhere.
Slip-On Mount for TOUGH LOCK Diffusers
A slip-on connection locks onto TOUGH LOCK diffusers numbered 404-26 and 404-32, so torch changes stay fast on supported G1, G2, TA3, TGX, ThruArm G2, Robotic CA3, S-Gun and T-Gun series. The copper body resists spatter buildup, yet the nozzle only fits the listed diffuser numbers; guns using other diffuser patterns cannot accept it.
Highlights
- Heavy-duty copper construction withstands high-heat MIG welding
- Slip-on connection fits TOUGH LOCK and compatible gun series
- Tapered bore directs shielding gas for cleaner welds
- Self-insulated design eliminates separate insulator component
- Compatible with diffuser numbers 404-26 and 404-32
Specifications
| Type | Tools |
|---|---|
| Brand | TREGASKISS |
Questions about this item
Will this nozzle fit the 404-26 gas diffuser on my existing Tough Lock torch?
Yes, the nozzle is listed as compatible with gas diffuser numbers 404-26 and 404-32 for Tough Lock series torches.
How can I verify the 1/8 inch stick-out is correct after installing the nozzle?
Measure the distance from the contact tip end to the nozzle bore opening; it should equal 1/8 inch for proper MIG welding performance.
Does the package include a gas diffuser or contact tip, or must I order them separately?
The nozzle is sold individually; gas diffusers such as the 404-26 or 404-32 and contact tips are separate purchases.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
