TREGASKISS
TREGASKISS 401-5-62 Slip-On Nozzle 3/8" Heavy Duty Tapered welding
Heavy-duty tapered copper nozzle with slip-on connection fits TOUGH LOCK and compatible MIG guns for automotive and fabrication welding
- TypeTools
- Heavy-duty tapered nozzle withstands high-heat MIG welding
- 5/8 in bore ensures consistent gas coverage on every pass
- Slip-on connection fits TOUGH LOCK and BTB series guns
- Copper construction with self-insulation resists spatter buildup
- Compatible with diffuser numbers 404-26 and 404-32 for quick setup
TREGASKISS 401-5-62 Slip-On Nozzle 3/8
This heavy-duty tapered nozzle fits TREGASKISS TOUGH LOCK series guns including BTB, Clean Air, G1 Water-Cooled, G2, Robotic CA3, S-Gun, T-Gun Water-Cooled, TA3, TGX and ThruArm G2 models. It uses a slip-on connection and self-insulated copper construction for MIG welding in automotive, fabrication and manufacturing environments.
Suited for MIG welders using compatible TOUGH LOCK
Welders running gas diffusers 404-26 or 404-32 with a 5/8 in bore will find the correct fit. Buyers who need a different bore diameter, a thread-on connection or a flush tip relationship should look at other nozzle configurations.
5/8 in bore diameter with 1/4 in tip recess
The copper nozzle provides a 5/8 in bore and holds the contact tip at a 1/4 in recess for consistent positioning. This specification determines compatibility with the listed diffusers and gun series.
Highlights
- Heavy-duty tapered nozzle withstands high-heat MIG welding
- 5/8 in bore ensures consistent gas coverage on every pass
- Slip-on connection fits TOUGH LOCK and BTB series guns
- Copper construction with self-insulation resists spatter buildup
- Compatible with diffuser numbers 404-26 and 404-32 for quick setup
Specifications
| Brand | TREGASKISS |
|---|---|
| Type | Tools |
Questions about this item
What bore diameter and connection type does the 401-5-62 nozzle use?
The nozzle has a 5/8 in bore diameter and a slip-on connection that fits over the gas diffuser.
How is the nozzle installed on the welding gun?
Slide the slip-on nozzle onto the compatible gas diffuser until it seats fully; the common mistake is not pushing it far enough to achieve the 1/4 in tip recess.
Which gas diffuser numbers does this nozzle require for replacement?
It works with gas diffuser numbers 404-26 and 404-32; replace the diffuser if it shows wear or damage to maintain proper gas coverage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
