TREGASKISS
TREGASKISS 401-4-62 Slip-On Nozzle 3/8" Standard Duty Tapered welding
Slip-on tapered nozzle with 5/8 in bore for standard-duty MIG welding on TOUGH LOCK compatible guns
- TypeTools
- Slip-on connection speeds nozzle changes
- Tapered copper bore directs shielding gas efficiently
- Self-insulated design reduces spatter build-up
- Standard-duty rating suits automotive and fabrication MIG work
- Compatible with TOUGH LOCK and multiple Tregaskiss gun series
Nozzle for Tough Lock and TOUGH LOCK guns
The TREGASKISS 401-4-62 is a slip-on copper nozzle built for standard-duty MIG welding. Its tapered bore measures 5/8 in and holds a 1/8 in tip recess. The self-insulated construction fits directly onto compatible gas diffusers without extra hardware. It is rated for use with TOUGH LOCK, BTB, Clean Air, G1, G2, Robotic CA3, S-Gun, T-Gun, TA3, TGX and ThruArm G2 series torches.
Suited for fabricators running standard-duty MIG
Welders using the listed Tregaskiss diffuser numbers 404-26 or 404-32 can install this nozzle without adapters. Shops that need heavy-duty or water-cooled specific nozzles with different bore profiles should look at other parts. Buyers whose torches use a thread-on or coarse-thread connection cannot use this slip-on design.
Critical fit is the gas diffuser part number
The nozzle only seats correctly on diffuser 404-26 or 404-32. Verify the diffuser number stamped on your torch before ordering; a mismatch will prevent proper gas coverage and tip alignment. No other specification overrides this compatibility requirement.
Highlights
- Slip-on connection speeds nozzle changes
- Tapered copper bore directs shielding gas efficiently
- Self-insulated design reduces spatter build-up
- Standard-duty rating suits automotive and fabrication MIG work
- Compatible with TOUGH LOCK and multiple Tregaskiss gun series
Specifications
| Type | Tools |
|---|---|
| Brand | TREGASKISS |
Questions about this item
What comes with the 401-4-62 nozzle and do I need a separate diffuser?
The nozzle is sold individually. A compatible gas diffuser such as the 404-26 or 404-32 is required and purchased separately.
How do I choose between the listed diffuser numbers 404-26 and 404-32?
Select the diffuser that matches your torch series; both part numbers are specified as compatible with this slip-on tapered nozzle.
What does the 5/8 in bore diameter mean for MIG welding performance?
The 5/8 inch bore provides standard gas coverage for MIG welding in automotive, fabrication and manufacturing applications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
