TREGASKISS
TREGASKISS 401-4-38 Welding Nozzle 3/8" Slip-On Tapered Standard Duty
A slip-on tapered copper nozzle with a 3/8-inch bore for MIG welding guns, compatible with Tough Lock and TGX series
- TypeTools
- Tapered shape directs shielding gas efficiently on MIG welds
- 3/8 inch bore fits standard wire sizes for consistent flow
- Slip-on connection enables quick nozzle changes without tools
- Self-insulated copper body resists spatter buildup during fabrication
- Compatible with TOUGH LOCK series guns for versatile shop use
TREGASKISS 401-4-38 MIG Welding Nozzle
This TREGASKISS nozzle fits TOUGH LOCK and compatible MIG guns used in automotive, fabrication and manufacturing. The 3/8 inch bore and tapered copper design directs shielding gas efficiently for standard-duty GMAW work. It slips onto gas diffusers 404-26 or 404-32 with a flush tip relationship. Buyers needing a larger bore or heavy-duty rating should look elsewhere.
Thermal Performance and Power Draw
Copper construction conducts heat away from the weld zone during normal MIG operation. The self-insulated body limits heat transfer to the gun handle without external insulation sleeves. Standard-duty rating suits typical fabrication cycles without excessive thermal buildup. No active cooling or water connections are required for this air-cooled component.
Build Quality and Daily Use
Slip-on connection allows quick nozzle changes between jobs without tools. The flush tip position keeps the contact tip protected inside the bore for consistent wire feeding. Compatible with BTB, Clean Air, G1, G2, Robotic CA3, S-Gun, T-Gun, TA3, TGX and ThruArm G2 series guns. Welders using thread-on diffusers or non-TOUGH LOCK systems cannot use this nozzle.
Highlights
- Tapered shape directs shielding gas efficiently on MIG welds
- 3/8 inch bore fits standard wire sizes for consistent flow
- Slip-on connection enables quick nozzle changes without tools
- Self-insulated copper body resists spatter buildup during fabrication
- Compatible with TOUGH LOCK series guns for versatile shop use
Specifications
| Brand | TREGASKISS |
|---|---|
| Type | Tools |
Questions about this item
How do I install the 401-4-38 nozzle and which step is most often missed?
Slide the tapered copper nozzle onto the compatible TOUGH LOCK diffuser until it seats flush with the contact tip. The step most often missed is confirming the diffuser is a 404-26 or 404-32 before installation.
What maintenance or replacement will the 401-4-38 nozzle need later?
Replace the copper nozzle when spatter buildup narrows the 3/8 in bore or the tapered tip deforms, as standard-duty copper wears faster than heavy-duty versions under MIG welding heat.
What limit appears first on the 401-4-38 nozzle during sustained MIG welding?
The standard-duty copper reaches its heat limit first, causing spatter to adhere and the 3/8 in bore to restrict gas flow before the slip-on connection or self-insulation fails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
