We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black metal desktop switch with ten RJ45 ports and one SFP slot

TP-Link

TP-Link TL-SL1311P 8-Port PoE+ 10/100 + 2-Port Gigabit + SFP Desktop Switch

SKU CH-VTX3-22DD9

Desktop switch with eight PoE+ ports at 10/100 Mbps, two gigabit RJ45 ports, one gigabit SFP port and a 65 W power budget

  • FormatDesktop
  • Primary Ports10 x RJ45 + 1 x SFP
  • Primary Port Speed10/100/1000Mbps
  • Primary Port Type8 x 10/100 Mbps 802.3af/at PoE+ Ports 2 x Gigabit RJ45 Ports
  • MAC Address Table2K
  • Jumbo Frames16KB
  • Powers eight devices through 802.3 af/at PoE+ ports
  • Two gigabit RJ45 ports plus one gigabit SFP uplink for fast links
  • 16 KB jumbo frame support handles large packets
  • Silent desktop format fits tight spaces
  • 65 W power budget feeds cameras, phones, APs

PoE+ Switch for IP Cameras and Access Points

The TP-Link TL-SL1311P provides eight 10/100 Mbps PoE+ ports compliant with 802.3 af/at standards, delivering up to 65 W total power budget for devices such as IP cameras, VoIP phones or wireless access points. Two additional Gigabit RJ45 ports and one Gigabit SFP port handle uplink traffic at higher speeds. The desktop form factor suits small offices or branch deployments where rack space is not available.

Metal Desktop Housing with External Power Adapter

A compact metal enclosure measuring 8.2" x 4.9" x 1.0" dissipates heat without a fan, keeping operation silent in quiet workspaces. Power is supplied through an external 53.5 VDC 1.31 A adapter included in the package, so no internal power supply occupies desk area. The switch supports Jumbo Frames up to 16 KB and a 2K MAC address table for efficient forwarding. Operating temperature ranges from 0 to 40 °C with 10-90% non-condensing humidity.

Verify PoE Budget and Uplink Requirements Before

Confirm that the 65 W PoE budget covers the combined draw of all powered devices you plan to connect, as ports 1–8 share this limit. Ensure your uplink path can use either the two Gigabit RJ45 ports or the single Gigabit SFP port with a compatible transceiver, because the eight PoE ports operate only at 10/100 Mbps. Check that the external adapter’s output voltage matches your regional mains supply.

Highlights

  • Powers eight devices through 802.3 af/at PoE+ ports
  • Two gigabit RJ45 ports plus one gigabit SFP uplink for fast links
  • 16 KB jumbo frame support handles large packets
  • Silent desktop format fits tight spaces
  • 65 W power budget feeds cameras, phones, APs

Specifications

BrandTP-Link
ModelTL-SL1311P
FormatDesktop
Primary Ports10 x RJ45 + 1 x SFP
Primary Port Speed10/100/1000Mbps
Primary Port Type8 x 10/100 Mbps 802.3af/at PoE+ Ports
2 x Gigabit RJ45 Ports
1 x Gigabit SFP Port
MAC Address Table2K
Jumbo Frames16KB
PoEStandard: 802.3 af/at compliant
PoE Ports: Ports 1–8
Power Supply: 65 W
PowerExternal Power Adapter (Output: 53.5 VDC / 1.31 A)
Max Power Consumption: 5.61 W (220 V/50 Hz. no PD connected)
Max Power Consumption: 77.32 W (110 V/50 Hz. with 65 W PD connected)
Dimensions8.2" x 4.9" x 1.0"
TemperatureOperating Temperature: 0 - 40 °C (32 - 104 °F)
Storage Temperature: -40 - 70 °C (-40 - 158 °F)
HumidityOperating Humidity: 10-90% RH non-condensing
Storage Humidity: 5-90% RH non-condensing
Package ContentsTL-SL1311P
Power Adapter
Installation Guide

Questions about this item

What speed do the eight PoE+ RJ45 ports actually run at?

The eight PoE+ ports operate at 10/100 Mbps, so each connected device is capped at 100 Mbps even though the switch also has Gigabit uplinks.

How much desk space does the TL-SL1311P need?

The desktop chassis measures 8.2" x 4.9" x 1.0", so allow roughly that footprint plus clearance for the external power adapter and cable routing.

What is the correct order to power up the switch and attached PoE devices?

Connect all Ethernet cables first, then plug the 53.5 VDC external adapter into the switch and mains; the switch negotiates PoE before delivering power, avoiding startup surges on ports 1–8.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.