We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Toughstripe black and white striped polyester floor tape roll 2 inch by 100 ft

Toughstripe

Toughstripe 104319 Floor Marking Tape 2 in 100 ft Polyester

SKU CH-1FDH-ZCGJJ

Two-inch-wide polyester floor marking tape in a continuous 100-foot roll with black and white stripes for hazard identification

  • TypeEmergency Exit Signs & Lights Accessories
  • Durable polyester withstands heavy foot traffic and equipment
  • Bold black-and-white stripes stay visible in low light
  • Continuous 100 ft roll covers long aisles without seams
  • Thin .008 in profile prevents tripping hazards
  • Operates reliably from 0 to 130 degrees F

What this tape is and who uses it

Brady 104319 Toughstripe is a continuous polyester floor marking tape supplied in a 100 ft roll. The striped black-and-white pattern is die-cut for clear visual guidance in industrial and commercial facilities. It suits safety managers and maintenance teams who need durable aisle marking without glow-in-the-dark properties. The material operates reliably from 0 to 130 degrees Fahrenheit.

How it fits into a facility layout

The 2 in width works with standard floor applicators and adheres directly to clean concrete, epoxy or sealed surfaces. A 0.008 in thickness keeps the profile low enough for pallet jacks and forklift traffic while resisting abrasion. The continuous roll lets crews cut exact lengths on site, reducing waste around corners, doorways and equipment footprints. No additional fasteners or adhesives are required for installation.

What the roll format and material change

Polyester construction resists moisture, chemicals and UV exposure better than vinyl alternatives, so markings stay legible longer in harsh environments. The die-cut continuous shape eliminates liner removal steps, speeding up large-area projects. Because the tape is not photoluminescent, it is suited for well-lit zones where glow performance is unnecessary. The 100 ft length covers typical aisle runs with a single roll.

Highlights

  • Durable polyester withstands heavy foot traffic and equipment
  • Bold black-and-white stripes stay visible in low light
  • Continuous 100 ft roll covers long aisles without seams
  • Thin .008 in profile prevents tripping hazards
  • Operates reliably from 0 to 130 degrees F

Specifications

TypeEmergency Exit Signs & Lights Accessories
BrandBrady

Questions about this item

How long can the tape stay on a floor that reaches 130 °F?

The material is rated for continuous exposure from 0 °F up to 130 °F, so it will not soften or lose adhesion at the top of that range.

Will the polyester tape add noticeable thickness to a forklift path?

At 0.008 in thick the tape is thin enough that wheeled traffic rolls over it without a perceptible step.

What surface preparation does the adhesive need to bond properly?

Clean the floor until it is dry and free of oil, dust or old coating; the acrylic adhesive then forms a permanent bond to concrete, epoxy or sealed wood.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.