We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Toshiba DMD DLP chip for S25 S35 SC25 SC35 SW20 T30 T45 T45C projectors

Toshiba

Toshiba DMD DLP Chip S25 S35 SC25 SC35 SW20 T30 T45 T45C Projector Accessory

SKU CH-5NN9-XJW85

Genuine Toshiba DMD/DLP replacement chip tested at least three times for clear projection without dead pixels across compatible S25, S35, SC25, SC35, SW20, T30, T45 and T45C projectors

  • TypeOthers
  • Genuine OEM replacement restores original projector performance
  • Extensively tested at least three times for clear imaging
  • Verified free of dead pixels before shipment
  • Compatible with Toshiba S25, S35, SC25, SC35, SW20, T30, T45, T45C models
  • New condition ensures reliable long-term operation

Genuine Toshiba DMD DLP Replacement Chip

This genuine OEM DMD DLP chip restores image quality for compatible Toshiba projectors. It fits the S25, S35, SC25, SC35, SW20, T30, T45 and T45C models. Each unit is tested at least three times to confirm a clear picture with no dead pixels. It is the correct part when the original imager fails.

Thermal Performance and Power

The chip operates within the projector's original thermal design and draws standard power for the light engine. No extra cooling or noise is introduced beyond the factory specification. Normal use maintains the same temperature profile as the original component. Reliability matches the OEM baseline.

Upgrade Context and Limits

This part replaces a failed or degraded DMD chip in the listed Toshiba projectors. It is not for users wanting higher native resolution, wider colour gamut or 3D capability beyond the projector's original design. The jump is worth it when the existing chip shows stuck mirrors or dead pixels. Buyers needing a different throw ratio or lens shift must change the whole projector.

Highlights

  • Genuine OEM replacement restores original projector performance
  • Extensively tested at least three times for clear imaging
  • Verified free of dead pixels before shipment
  • Compatible with Toshiba S25, S35, SC25, SC35, SW20, T30, T45, T45C models
  • New condition ensures reliable long-term operation

Specifications

TypeOthers

Questions about this item

How do I install the DMD chip in a Toshiba T30 projector, and which step causes the most failures?

Seat the chip squarely on the flex connector, then tighten the retaining screws in a cross pattern so the die stays parallel; skipping the cross-tightening tilts the chip and creates dead-pixel lines.

What maintenance will the DMD chip in my Toshiba S25 projector need later?

Only periodic lens-filter cleaning with compressed air; the sealed DMD package itself has no user-serviceable parts and requires no lubrication or recalibration.

What limit appears first when the Toshiba SC35 projector runs the DMD chip continuously for hours?

Thermal buildup in the optical block eventually triggers the projector’s over-temperature protection and forces a cool-down cycle.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.