TOPWOLF
TOPWOLF SS-GSV0046 2800mAh Power Bank for DJI Osmo Pocket 3
A 2800mAh grip powers the DJI Osmo Pocket 3 while filming, reaching 80% in 32 minutes and adding only 85g
- Capacity2800mAh
- 2800mAh capacity charges Pocket 3 to 80% in 32 minutes
- 10W 5V/2A output powers camera continuously while filming
- 88mm length and 85g weight adds minimal bulk to Pocket 3
- LED indicators show remaining grip battery level at button press
- Built-in protection guards against overcharge, over-discharge and short circuits
Dedicated Power Bank for DJI Osmo Pocket 3
The TOPWOLF SS-GSV0046 is a 2800mAh power bank built exclusively for the DJI Osmo Pocket 3. It attaches directly to the camera body to extend recording time without needing a separate cable. Weighing 85g and measuring 88mm long, it adds minimal bulk while keeping the setup handheld and portable. A built-in LED indicator shows the remaining charge level at a press.
Ideal for Long Shoots, Not for Multi-Device Users
This grip suits creators who film extended sessions with the Pocket 3 and want to keep the camera running while charging. It delivers a steady 10W output that maintains the camera’s battery level during recording. Buyers who need to charge phones, tablets or other accessories should look at a standard power bank with multiple ports and higher total capacity.
2800mAh Capacity with Fast Top-Up
The 2800mAh cell can bring the Pocket 3 to roughly 80 percent charge in about 32 minutes. Continuous 5V/2A output provides enough headroom to sustain filming while the camera battery stays topped up. Once the grip itself is depleted, filming must pause until it is recharged, so very long productions will need a second power source or downtime to recharge.
Highlights
- 2800mAh capacity charges Pocket 3 to 80% in 32 minutes
- 10W 5V/2A output powers camera continuously while filming
- 88mm length and 85g weight adds minimal bulk to Pocket 3
- LED indicators show remaining grip battery level at button press
- Built-in protection guards against overcharge, over-discharge and short circuits
Specifications
| Brand | TOPWOLF |
|---|---|
| Model | SS-GSV0046 |
| Capacity | 2800mAh |
Questions about this item
What must I already own for this 2800mAh power bank to work?
You need a DJI Osmo Pocket 3 camera; the grip attaches directly to it and supplies 5V/2A power while filming.
How does the 10W output behave if I keep using my Pocket 3 while the grip is attached?
The 5V/2A output keeps the camera’s battery level steady during continuous recording, so you can film without the internal cell draining.
How can I confirm the SS-GSV0046 is working after I press the power button?
LED indicators light up to show the grip’s remaining charge, letting you verify it is delivering power to the Pocket 3.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



