TOPRANK
TOPRANK 150W 135W Laptop Charger 4.5mm HP ZBook OMEN Pavilion Gaming Spectre
Delivers up to 150W at 19.5V 7.7A through a 4.5mm connector for compatible HP ZBook, OMEN, Pavilion Gaming and Spectre models
- TypeChargers & Adapters
- 150W peak output charges demanding ZBook and OMEN models fast
- 135W and 120W compatibility covers a wide range of HP workstations and gaming laptops
- 100-240V input lets you use the adapter worldwide without a voltage converter
- 5mm connector fits listed HP part numbers and excludes 7.4mm barrel types
- 5V at up to 7.7A delivers stable power for high-performance workloads
Replacement charger for HP workstations
This 150W AC adapter supplies 19.5V at 7.7A and also covers 135W and 120W requirements. It fits ZBook Fury, Studio, Power and EliteBook models plus OMEN, Victus and Pavilion Gaming series. The 4.5mm barrel connector matches the listed part numbers. Buyers needing the larger 7.4mm tip cannot use this unit.
Efficient operation across global voltages
The adapter accepts 100V to 240V at 50Hz to 60Hz without manual switching. Maximum draw is 150W at the rated output. Normal use stays within the specified current limits and the unit runs at typical adapter temperatures. No active cooling is present so acoustic output is minimal.
Simple integration with existing cabling
The fixed output lead ends in the 4.5mm by 3.0mm plug used by the compatible HP part numbers. A standard IEC C5 or C7 mains cord completes the connection to wall power. The brick form factor sits on the desk or floor and frees the laptop’s own USB-C ports for peripherals. Builds requiring a second simultaneous charger will need an additional unit.
Highlights
- 150W peak output charges demanding ZBook and OMEN models fast
- 135W and 120W compatibility covers a wide range of HP workstations and gaming laptops
- 100-240V input lets you use the adapter worldwide without a voltage converter
- 5mm connector fits listed HP part numbers and excludes 7.4mm barrel types
- 5V at up to 7.7A delivers stable power for high-performance workloads
Specifications
| Type | Chargers & Adapters |
|---|
Questions about this item
How do I install the 4.5mm connector and what step is often missed?
Align the 4.5 * 3.0 mm plug with the laptop's DC jack and push straight in until it seats firmly; the step often missed is confirming the 19.5V 7.7A 150W rating matches the device label before powering on.
What maintenance or replacement will this charger need later?
The AC adapter has no user-serviceable parts; replace the unit if the 100-240V input range fails, the 19.5V output drops below 6.15A, or the 4.5mm connector shows physical wear.
What limit appears first during sustained use at full load?
Continuous 150W output at 19.5V 7.7A is the thermal ceiling; the adapter will throttle or shut down if cooling cannot dissipate the heat generated at that power level.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



