We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New black cast-iron pillow block bearing with alloy steel insert

Timken

Timken YAS 15/16 SGT Pillow Block Bearing collectible

SKU CH-933P-PVBJ8

A cast-iron pillow block bearing with a 15/16 in bore and double-sealed radial ball insert, rated from -65 to 200 °F

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlack
  • Cast iron housing resists shock loads in heavy machinery
  • Double-sealed closure keeps contaminants out for longer service life
  • 15/16 in bore fits standard shafts without adapters
  • Pre-lubricated with NLGI #2 equivalent grease for immediate installation
  • Operates from -65 °F to 200 °F across extreme environments

Collectible pillow block bearing

The Timken YAS 15/16 SGT pillow block bearing is offered as a new collectible item within the sports memorabilia category. It features a cast iron housing and an alloy steel radial ball insert with a 15/16 in cylindrical bore. The unit is double sealed and lubricated with an NGLI #2 equivalent grease.

Cast iron housing and double seals

The cast iron housing provides a rigid mounting platform with a base height of .594 in and an overall height of 2.859 in. Two bolt-through holes are spaced on a 4 1/8 in center-to-center length across the 5.5 in overall length. Double seals help retain the factory lubricant and exclude contaminants.

Temperature and mounting limits

Operating range spans from -65 Degrees F to 200 Degrees F, defining the thermal envelope for the installed lubricant and seal materials. The two-hole bolt-through pattern fixes the mounting orientation and hole spacing. Collectors should note the item is sold as a display piece rather than for active power transmission service.

Highlights

  • Cast iron housing resists shock loads in heavy machinery
  • Double-sealed closure keeps contaminants out for longer service life
  • 15/16 in bore fits standard shafts without adapters
  • Pre-lubricated with NLGI #2 equivalent grease for immediate installation
  • Operates from -65 °F to 200 °F across extreme environments

Specifications

BrandTIMKEN
TypeBearings, V-belts & Power Transmission Equipment
ColorBlack

Questions about this item

How often will the NGLI #2 equivalent lubricant need replacement in the YAS 15/16 SGT bearing?

The double-sealed radial ball insert is factory-filled with NGLI #2 equivalent grease and designed for extended service intervals; exact relubrication timing depends on load, speed and operating temperature up to 200 Degrees F.

Which specification limits continuous operation of the Timken pillow block first under sustained load?

The maximum operating temperature of 200 Degrees F is the primary thermal limit; exceeding it risks lubricant breakdown and reduced bearing life.

How much heat and noise does the cast-iron housed YAS 15/16 SGT generate when running all day?

Cast iron housing dissipates heat effectively within the -65 to 200 Degrees F range, while the double-sealed radial ball insert minimises noise during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.