We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray cast-iron two-bolt flange bearing with eccentric locking collar

Timken

Timken RCJT 1/2 2-Bolt Flange Bearing 1/2" Bore

SKU CH-2Q75-1XZJQ

A 2-bolt flange bearing with a 1/2 in bore, cast-iron housing and eccentric locking collar for secure shaft mounting

  • Cast iron housing resists vibration and shock
  • 1/2 in bore fits standard shafts directly
  • Eccentric locking collar secures shaft without set screws
  • 2,400 lb dynamic load handles heavy radial forces
  • 65 to 200 °F range suits extreme environments

1/2" Bore 2-Bolt Flange Bearing

The Timken RCJT 1/2 is a cast-iron housed ball bearing unit with a 1/2 inch bore. It uses an eccentric locking collar to secure the shaft in light-duty power transmission applications. The unit is supplied new and ready for installation. It is not suited for buyers who need a larger bore diameter or a four-bolt mounting pattern.

Capacity and Load Limits

The bearing delivers a dynamic load capacity of 2,400 lb and a static capacity of 1,060 lb. These ratings provide headroom for moderate radial loads in conveyor, fan or agricultural equipment. The grease fill uses Mobil Polyrex EM or an NLGI #2 equivalent for standard operating conditions. It cannot support heavily shocked or continuously overloaded shafts beyond these stated limits.

Temperature and Material Constraints

The 52100 chrome steel insert operates reliably from -65 °F to 200 °F. The cast-iron housing and standard lubricant define the practical thermal envelope for continuous service. Operation outside this range risks lubricant breakdown or reduced bearing life. The design does not accommodate high-speed precision spindles or environments requiring stainless-steel corrosion resistance.

Highlights

  • Cast iron housing resists vibration and shock
  • 1/2 in bore fits standard shafts directly
  • Eccentric locking collar secures shaft without set screws
  • 2,400 lb dynamic load handles heavy radial forces
  • 65 to 200 °F range suits extreme environments

Specifications

No published specifications for this item yet.

Questions about this item

Will the 3 in bolt-hole spacing match the existing mounting pattern on my older frame?

The bearing uses a 3 in bolt-hole center-to-center dimension with 3/8 in bolts, so it fits the same pattern used on many legacy flanges.

How can I confirm the eccentric locking collar is gripping the shaft correctly after installation?

Tighten the collar in the direction of shaft rotation until it seats, then verify there is no axial play and the setscrew is secure.

Does the box include the Mobil Polyrex EM grease or must I purchase NLGI #2 equivalent separately?

The unit ships pre-lubricated with Mobil Polyrex EM; no additional grease is required for initial operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.