We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sync cable with two DIN 1.0/2.3 plugs and a 4-pin LEMO connector

Timecode Systems

Timecode Systems UltraSync ONE to RED Camera Sync Cable 1.0/2.3 DIN LEMO

SKU CH-AQJH-2KZWY

Sync cable linking UltraSync ONE to RED cameras via 1.0/2.3 DIN and 4-pin LEMO for timecode and genlock

  • Sync timecode and genlock with RED cameras
  • Secure 4-pin LEMO and DIN 1.0/2.3 connectors
  • Built for professional on-location durability
  • Enables multi-camera audio-video precision
  • Direct UltraSync ONE integration streamlines workflow

UltraSync ONE to RED Sync Cable

This cable links an UltraSync ONE unit to RED cameras that accept a 4-pin LEMO sync port. It carries both timecode and genlock signals for frame-accurate synchronisation on multi-camera productions. The assembly is built for professional film and video workflows where precise audio-to-video alignment is required.

Connectors and Signal Path

Two DIN 1.0/2.3 plugs mate with the UltraSync ONE while a locking 4-pin LEMO connects to the camera. The shielded construction protects the timecode and genlock lines from electromagnetic interference on set. No active electronics are described, so the cable passes the signals transparently.

Durability Under Production Conditions

The jacket and strain reliefs are designed to survive repeated connection cycles and the physical stress of on-location shoots. Secure locking collars on both DIN and LEMO ends prevent accidental disconnection during camera movement. The cable maintains signal integrity across the temperature ranges encountered in studio and exterior environments.

Highlights

  • Sync timecode and genlock with RED cameras
  • Secure 4-pin LEMO and DIN 1.0/2.3 connectors
  • Built for professional on-location durability
  • Enables multi-camera audio-video precision
  • Direct UltraSync ONE integration streamlines workflow

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 1.0/2.3 DIN connectors to the UltraSync ONE and the 4-pin LEMO to the RED camera?

Insert the two DIN 1.0/2.3 plugs into the UltraSync ONE timecode and genlock ports, matching the labelled sockets, then push the 4-pin LEMO firmly into the RED camera sync port until the latch clicks.

What wear should I watch for on the DIN 1.0/2.3 and LEMO connectors over time?

Inspect the DIN 1.0/2.3 pins for bending or corrosion and check the LEMO latch and insulator for cracks; replace the cable if any contact feels loose or signal drop-outs appear.

At what point does cable length or shielding limit reliable timecode and genlock transmission on long shoots?

The fixed cable length and professional shielding are designed to maintain signal integrity for standard on-set runs; excessive coiling or tight bends near connectors are the first factors to degrade performance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.