We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled cable with 7-pin and 2.5mm LANC plugs

Tilta Technology Co.,Ltd

Tilta Technology Co.,Ltd Nucleus-M 2.5mm LANC Run/Stop Cable

SKU CH-TXZH-12J86

A 2.5 mm LANC cable that triggers run/stop on Sony FS5, FS7 and Panasonic Eva cameras via the Nucleus-M motor system

  • Controls run/stop on Sony FS5/FS7 and Panasonic Eva cameras
  • Connects Nucleus-M motor to camera R/S port via 2.5mm LANC plug
  • Exclusive to Nucleus-M system for secure hand-unit operation
  • Simple 7-pin to R/S connection for quick on-set setup
  • Enables remote recording control for professional video workflows

Camera Run/Stop Cable

The Tilta Nucleus-M 2.5mm LANC cable links a Nucleus-M motor to the run/stop port on Sony FS5, FS7 and Panasonic EVA cameras. It lets the proprietary hand unit or hand grips trigger recording remotely. The cable is intended solely for Nucleus-M systems and will not operate with other control units.

Passive Operation

The cable draws no external power and adds no active electronics to the signal path. It simply passes the LANC command from the motor to the camera body. There are no fans, no heat dissipation concerns and no audible noise during use.

Build and Connectors

A 7-pin connector plugs into the motor while a 2.5mm jack inserts into the camera R/S port. The moulded strain reliefs protect the terminations from repeated plugging on set. The fixed length suits typical rig layouts but cannot be extended without an additional coupler.

Highlights

  • Controls run/stop on Sony FS5/FS7 and Panasonic Eva cameras
  • Connects Nucleus-M motor to camera R/S port via 2.5mm LANC plug
  • Exclusive to Nucleus-M system for secure hand-unit operation
  • Simple 7-pin to R/S connection for quick on-set setup
  • Enables remote recording control for professional video workflows

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 7-pin end to a Nucleus-M motor and the 2.5 mm LANC plug to the camera R/S port?

Insert the 7-pin connector firmly into any Nucleus-M motor port, then plug the 2.5 mm LANC end into the camera's R/S socket; the cable only works with Nucleus-M hand units and grips.

Will the LANC connector or 7-pin plug wear out and need replacement after heavy use?

The cable has no user-serviceable parts; if the LANC tip or 7-pin housing becomes loose or damaged, replace the entire cable.

What is the first limitation I hit when running the camera continuously with this cable?

The cable itself imposes no recording limit; sustained run time depends on the camera's thermal and media constraints.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.