We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small bottles, one blue and one red, liquid thread locker adhesive

Thread Locker Blue and Red 6ml x2

SKU CH-ZHSW-18XVW

Two 6 ml bottles supply medium-strength blue and high-strength red threadlocker to secure metal fasteners against vibration, corrosion and leakage

  • TypeLiquid
  • ColorBlue and Red
  • Prevents vibration loosening with anaerobic thread-locking formula
  • Two strengths in one pack: medium blue and high-strength red
  • Blue grade removable with hand tools; red grade needs heat
  • Seals threads against rust, corrosion and fluid leakage
  • Functional cure in 10-20 minutes, full strength in 24 hours

Two-strength threadlocker set

This pack supplies a 6 ml bottle of medium-strength blue threadlocker and a 6 ml bottle of high-strength red threadlocker. Both anaerobic liquids cure between metal threads to stop vibration loosening, seal against corrosion and prevent leakage on nuts, bolts and other fasteners.

Makers needing both removable and permanent bonds

The blue grade lets you disassemble joints with hand tools whenever required, while the red grade demands heat and heavy tools for removal. Buyers who only ever need one strength level or who work exclusively on plastic threads should look at something else.

Consistent cure under continuous vibration

After application the adhesive sets initially in 10 to 20 minutes and reaches full cure in 24 hours, maintaining its locking torque during prolonged shaking and thermal cycling. The anaerobic chemistry keeps the bond stable without drying out or becoming brittle over long service periods.

Highlights

  • Prevents vibration loosening with anaerobic thread-locking formula
  • Two strengths in one pack: medium blue and high-strength red
  • Blue grade removable with hand tools; red grade needs heat
  • Seals threads against rust, corrosion and fluid leakage
  • Functional cure in 10-20 minutes, full strength in 24 hours

Specifications

BrandGNEOCO
TypeLiquid
ColorBlue and Red

Questions about this item

What size threaded fasteners can I use the 6 ml bottles on?

The liquid threadlocker works on standard metal nuts, bolts and screws; apply a few drops to the threads, assemble, and allow 10-20 minutes for initial cure and 24 hours for full strength.

Can I still remove bolts later if I use the red high-strength formula on my existing hardware?

Red threadlocker creates a permanent bond that requires heating the fastener before it can be broken loose with tools, unlike the blue medium-strength version which can be removed with hand tools at any time.

How do I know the adhesive has fully cured on my assembly?

After tightening the joint, wait 10-20 minutes for initial set; the bond reaches full locking strength and corrosion resistance after 24 hours at room temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.