We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PET fleece harness tape roll, 3/8 inch wide by 82 feet long

The Install Bay

The Install Bay IB951618 3/8 in x 82 ft Fabric PET Fleece Harness Tape

SKU CH-8NC3-DHYNK

3/8-inch by 82-foot PET fleece tape dampens noise, resists abrasion and bundles harnesses securely while staying flexible in extreme temperatures

  • TypeInstallation Tools
  • Reduces cabin noise with PET fleece construction
  • 82 ft roll covers extensive wiring runs
  • 84 MIL thickness shields wires from abrasion
  • Hand-tearable tape speeds up installation time
  • Stable 4.6 N unwind force ensures consistent application

Interior harness tape for automotive wiring

The Install Bay IB951618 is a single-layer PET fleece cloth tape designed for wire harness covering in vehicle passenger compartments. It combines noise damping, abrasion resistance and bundling strength while keeping harnesses flexible for easy assembly. The rubber-based adhesive is optimised for manual application and strong adhesion. It suits car audio wiring, engine bay dressing and home electrical projects.

Replaces basic electrical tape or loose loom

This tape upgrades from standard vinyl tape that hardens, splits or leaves residue over time. The jump is worth it when you need a harness wrap that stays flexible in extreme temperatures, tears cleanly by hand for quick application and maintains a stable unwind force of 4.6 N for consistent wrapping. It also dampens panel rattle where interior trim pieces meet.

Limited to manual wrapping on accessible harnesses

The 9.84 mil thickness adds bulk, so it is not suited for tight loom channels or high-density connector backshells where space is minimal. The 82 foot roll covers roughly 25 metres of harness length, which may require multiple rolls for full vehicle looms. It provides basic abrasion resistance only, not heavy-duty protection against sharp metal edges or sustained oil exposure.

Highlights

  • Reduces cabin noise with PET fleece construction
  • 82 ft roll covers extensive wiring runs
  • 84 MIL thickness shields wires from abrasion
  • Hand-tearable tape speeds up installation time
  • Stable 4.6 N unwind force ensures consistent application

Specifications

TypeInstallation Tools

Questions about this item

What width and length does the IB951618 tape come in for fitting wire harnesses?

The tape is 3/8 inch wide and 82 feet long, which equals 25 metres, giving enough length to wrap multiple interior harness bundles.

How do you apply the PET fleece tape by hand without a dispenser, and what mistake should be avoided?

The tape is hand-tearable, so pull off the needed length, tear it cleanly, and wrap it tightly around the harness; the common error is stretching the tape while wrapping, which reduces its noise-damping and abrasion-resistance properties.

When will the rubber-based adhesive need to be checked or the tape replaced on a vehicle harness?

The tape is designed with ageing resistance for long-term interior use, but inspect it whenever the harness is accessed for other work; replace any sections that show adhesive loss, brittleness, or wear from panel contact.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.