We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

The Install Bay

The Install Bay 51026 3/8 in x 82 ft PET Cloth Harness Tape car electronics accessory

SKU CH-1F7E-CCPCS

Single-layer PET cloth harness tape, 82 ft long, withstands -40 °C to 150 °C for abrasion protection and noise damping

  • TypeInstallation Tools
  • 3/8 in × 82 ft roll covers long harness runs in one piece
  • 2 MIL PET fleece shields wires from abrasion in engine bays
  • Acrylic adhesive holds from –40 °C to 150 °C without lifting
  • Single-layer cloth dampens panel buzz and rattles across temperature swings
  • Cross-wise wrap design locks bundles tight for OEM-look installs

PET Cloth Harness Tape

The Install Bay 51026 tape is a single-layer fabric wrap designed for automotive wiring harnesses. It uses a PET fleece carrier with an acrylic-based adhesive that bonds securely to wire looms. The roll measures 3/8 inch wide by 82 feet long and is built for cross-wise application perpendicular to the wire direction.

Wiring Integration Needs

This tape fits into a build by wrapping directly onto bundled conductors in engine bays or cabin looms. It requires clean, dry surfaces for the adhesive to grip and a installer willing to spiral-wrap perpendicular to the wire run. It frees the harness from abrasion against chassis edges and eliminates buzzing where panels meet.

Temperature And Noise Benefits

The acrylic adhesive remains functional from minus 40 degrees up to 150 degrees Celsius, so the wrap will not unravel during cold starts or turbo heat soak. The 10.2 MIL PET fleece dampens vibration noise between contacting panels while adding a layer of abrasion armour. The result is an OEM-look finish that protects both insulation and surrounding trim.

Highlights

  • 3/8 in × 82 ft roll covers long harness runs in one piece
  • 2 MIL PET fleece shields wires from abrasion in engine bays
  • Acrylic adhesive holds from –40 °C to 150 °C without lifting
  • Single-layer cloth dampens panel buzz and rattles across temperature swings
  • Cross-wise wrap design locks bundles tight for OEM-look installs

Specifications

TypeInstallation Tools

Questions about this item

How long is the roll before it runs out?

The roll is 82 ft (25 metres) long, giving plenty of length for a full vehicle harness job.

Does the adhesive hold up when the engine bay hits 150 °C all day?

The acrylic adhesive is rated for continuous exposure up to 150 °C and stays flexible down to -40 °C.

What width of wiring loom does the 3/8 in tape suit?

The 3/8 in width is designed for cross-wise wrapping on standard automotive harness bundles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.