TerraWave Solutions
TerraWave Solutions M3030035O10006O-B 698-2700MHz Omni Antenna
Outdoor omni antenna covering 698-2700 MHz with 3/3.5 dBi gain, 360° horizontal and 55°/45° vertical beamwidths, single N-style connector and mast mount
- Covers LTE and Wi-Fi bands from 698 to 2700 MHz
- 360° horizontal coverage with a single N-style connector
- 3/3.5 dBi gain for stronger outdoor signal reach
- 55°/45° vertical beamwidth focuses energy toward the horizon
- Lightweight 1.78 lb design simplifies mast installation
Outdoor LTE and Wi-Fi coverage
This Ventev omni antenna operates from 698 to 2700 MHz and supports LTE, cellular and 2.4 GHz wireless systems. It provides 3 dBi gain at the lower band and 3.5 dBi at the upper band. A single N-style jack connector and a mast mount are included for outdoor installation. The unit weighs 1.78 lbs and measures 3.93 by 5.11 inches.
Upgrade from narrower-band antennas
Replaces single-band antennas that cover only cellular or only 2.4 GHz frequencies. The jump is worth it when a deployment needs one antenna for both LTE and Wi-Fi services across the full 698 to 2700 MHz range. It is not suited for buyers who need higher gain or a narrower beamwidth for long-distance point-to-point links.
Fits mast-mounted outdoor builds
Mounts on a mast and connects via one N-style port to a radio, gateway or DAS head-end. The 360-degree horizontal beamwidth and 55 to 45-degree vertical beamwidth deliver broad sector coverage. Listed in iBwave Design 6.2 for network planning. It does not serve builders who need multiple ports for MIMO or dual-polarity configurations.
Highlights
- Covers LTE and Wi-Fi bands from 698 to 2700 MHz
- 360° horizontal coverage with a single N-style connector
- 3/3.5 dBi gain for stronger outdoor signal reach
- 55°/45° vertical beamwidth focuses energy toward the horizon
- Lightweight 1.78 lb design simplifies mast installation
Specifications
| Brand | Ventev |
|---|
Questions about this item
What diameter mast does the included mount fit?
The antenna includes a mast mount; the datasheet specifies the exact mast diameter range it accepts.
How do I attach the N-style connector without damaging the centre pin?
Align the connector, hand-tighten until the pin seats, then use a torque wrench to the value shown in the datasheet — over-tightening is the common error.
When should I replace the antenna if the radome cracks or the N-connector corrodes?
Inspect the radome and N-style connector annually; replace the unit if you see cracks, water ingress or corrosion on the connector.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Wilson Antennas 305-480 2 ft Silver Load FGT Fiberglass Whip Black antenna
Galtronics 02130269-04935U Indoor Omni Antenna 617-6000MHz 4.3-10 Female
- Antenna
Galtronics 02121269-04935U broadband ceiling mount omni antenna 698-6000MHz
- Antenna mount



