TerraWave Solutions
TerraWave Solutions 2.4/5GHz 6dBi Directional Antenna 4 RPTNC 36" 105/125° H 60/70° V
A 6 dBi dual-band directional Wi-Fi antenna with four RPTNC leads, 36" cables, 105/125° horizontal and 60/70° vertical beamwidths for indoor or outdoor wall and mast mounting
- Dual-band coverage from 2.4 and 5 GHz operation
- 6 dBi gain extends directional Wi-Fi reach
- Four RPTNC leads simplify access-point connections
- Precise aiming via articulating wall/mast mount
- Outdoor durability from -40 °C to +158 °F range
TerraWave 2.4/5GHz 6dBi Directional Antenna
This dual-band directional antenna delivers 6 dBi gain across 2.4 and 5 GHz frequencies for high-density Wi-Fi deployments. It features four RPTNC connectors with 36-inch leads to simplify cabling to compatible access points. The patch design suits indoor or outdoor installations where focused coverage is required.
Sustained load performance
Horizontal beamwidths of 105° and 125° combine with vertical beamwidths of 60° and 70° to concentrate signal where capacity is needed most. The antenna operates continuously from -40° to +158° F without performance degradation. RoHS-compliant construction supports long-term reliability in demanding environments.
Pre-order checklist
Verify your access point provides four RPTNC ports to match the four leads supplied. Confirm the mounting surface can support a 65 lb unit measuring 10 x 5.6 x 1.4 inches. Ensure wall or mast mounting hardware suits the intended location and structural capacity.
Highlights
- Dual-band coverage from 2.4 and 5 GHz operation
- 6 dBi gain extends directional Wi-Fi reach
- Four RPTNC leads simplify access-point connections
- Precise aiming via articulating wall/mast mount
- Outdoor durability from -40 °C to +158 °F range
Specifications
| Brand | Ventev |
|---|
Questions about this item
How much heat does the 6 dBi directional antenna generate when running continuously?
The antenna is a passive component with no active electronics, so it produces no measurable heat during operation.
Which access point interfaces are required to connect the four RPTNC leads?
The antenna needs an access point with four reverse-polarity TNC ports, such as Cisco's latest APs, to use all four dual-band leads.
Will the 36-inch pigtails reach a wall-mounted AP if I keep my existing mast bracket?
The 36-inch leads and included articulating mount support both wall and mast mounting, allowing flexible placement with your current bracket.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Wilson Antennas 305-480 2 ft Silver Load FGT Fiberglass Whip Black antenna
Galtronics 02130269-04935U Indoor Omni Antenna 617-6000MHz 4.3-10 Female
- Antenna
Galtronics 02121269-04935U broadband ceiling mount omni antenna 698-6000MHz
- Antenna mount



