Tenda
Tenda POE30G-AT Gigabit PoE Injector 30W 100m
Delivers up to 30 W of power and gigabit data over Ethernet cable to 100 metres with plug-and-play simplicity
- TypePoE Injector
- SpecificationsStandard & Protocol: Compatible with IEEE802.3, IEEE802.3u,
- FeaturesSupport the powered devices compatible with IEEE802.3af?IEEE
- Powers devices up to 30W via IEEE802.3at standard
- Extends network reach up to 100 metres over Cat5e/6 cable
- Gigabit port delivers 1000Mbps data alongside power
- Plug-and-play operation requires no configuration
- Supports both IEEE802.3af and IEEE802.3at compliant equipment
Gigabit PoE Injector with 30 W Output
The Tenda POE30G-AT is a Power-over-Ethernet injector that adds up to 30 W of power to a Gigabit Ethernet line. It complies with IEEE 802.3af and 802.3at standards and extends both data and power up to 100 metres over Cat 5e or Cat 6 cable. No configuration is required, so the unit works immediately after connecting the cables.
Installers Powering Remote PoE Devices
This injector suits installers who need to power a wireless access point, VoIP phone or IP camera where no mains socket exists. It is not for networks that require multi-port PoE switching or managed features such as VLANs or port monitoring. Buyers needing to supply more than 30 W per port should look at a higher-power solution.
30 W Maximum Power per Port
The single specification that decides compatibility is the 30 W maximum output on the data-and-power port. A connected device must draw 30 W or less and comply with IEEE 802.3af or 802.3at for the injector to operate correctly.
Highlights
- Powers devices up to 30W via IEEE802.3at standard
- Extends network reach up to 100 metres over Cat5e/6 cable
- Gigabit port delivers 1000Mbps data alongside power
- Plug-and-play operation requires no configuration
- Supports both IEEE802.3af and IEEE802.3at compliant equipment
Specifications
| Brand | Tenda |
|---|---|
| Model | POE30G-AT |
| Type | PoE Injector |
| Specifications | Standard & Protocol: Compatible with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af , IEEE802.3at Standard: CSMA / CD, TCP / IP Port: 1 GE port 1 data&power output port supporting PoE Indicator: PWR, PoE Power output: 30W Operation Temperature: 0 degree C ~ 40 degree C Storage temperature: -40 degree C ~ 70 degree C Operating Humidity: 10% ~ 90% (noncondensing) Storage Humidity: 5% ~ 90% (noncondensing) certification: CE / FCC / ROHS Dimension: 1.30" x 5.16" x 2.36" |
| Features | Support the powered devices compatible with IEEE802.3af?IEEE802.3at Standard Transmission range up to 100M Plug and play |
| Shipping weight | 0.76 kg |
| Package size | 311 × 260 × 198 mm |
Questions about this item
How do I install the Tenda POE30G-AT and which port do people plug the device into by mistake?
Connect the injector to mains power, run a network cable from your switch to the GE port, then link the data&power output port to the powered device; the step users miss is plugging the AP or camera into the input GE port instead of the PoE output port.
What maintenance or replacement will the POE30G-AT need over time?
The unit has no moving parts or user-serviceable components; if the internal power supply fails after extended use the whole injector must be replaced.
What limit appears first when the injector runs at full 30W load continuously?
The 100 metre cable distance ceiling is reached before thermal or current limits, so runs beyond 100 metres on Cat.5e or Cat.6 will drop power or data first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Ubiquiti Networks
Ubiquiti Networks POE-48 48 V PoE Injector with Power Cord
- PoE Adapter
$14.99
0.00018026BTC
In stock
HPE
HPE JW124A Aruba Power Cable North America
- Standard Power Cord
- Power Cord for Opti…
$13.99
0.00016824BTC
In stock