Tempil
Tempil Non-Reversible Temp Indicator Strip 190-220°F PK10 26703
Self-adhesive strips change colour permanently at 190, 200, 210 and 220°F, pack of ten
- Monitors four distinct temperatures with 190 200 210 220 °F points
- Permanent colour change shows exact heat reached without reverting
- Self-adhesive polyester strip applies fast to any clean surface
- Slim 0.197 in profile fits tight spaces on equipment
- Ten strips per pack 26703 covers multiple inspection jobs
Temperature indicator strip for heat monitoring
The Tempil non-reversible strip shows when a surface reaches 190, 200, 210 or 220 degrees Fahrenheit. Each of the four positions changes colour permanently at its rated point. The self-adhesive backing lets you attach it to pipes, equipment or test pieces. Accuracy is within plus or minus two percent of the marked temperature.
Single-use thermal record with no power needed
The polyester strip operates passively and requires no batteries or wiring. Once a temperature point is exceeded the corresponding indicator stays changed, giving a permanent record of the maximum heat reached. The thin profile of 0.197 inches adds negligible insulation to the measured surface. Ten strips are supplied per pack for multiple test locations.
Compact adhesive strip for quick installation
Each strip measures 1.77 inches wide by 0.91 inches high, fitting onto curved or flat surfaces. The adhesive holds during normal heating and cooling cycles without additional fasteners. Because the indication is non-reversible the strip cannot be reused after a temperature event. Users needing a resettable or digital readout will require a different instrument.
Highlights
- Monitors four distinct temperatures with 190 200 210 220 °F points
- Permanent colour change shows exact heat reached without reverting
- Self-adhesive polyester strip applies fast to any clean surface
- Slim 0.197 in profile fits tight spaces on equipment
- Ten strips per pack 26703 covers multiple inspection jobs
Specifications
| Brand | Tempil |
|---|
Questions about this item
How do I install the self-adhesive strip and what step do people skip?
Peel the backing, press the strip firmly onto a clean dry surface at the four temperature points 190 200 210 and 220 degrees F, and hold for several seconds; the step most people skip is cleaning the surface first so the adhesive bonds properly.
When will the indicator need replacement after it changes colour?
Each strip is non-reversible so once the 190 200 210 or 220 degree F point turns black it cannot reset; you replace that individual strip immediately and the pack of 10 gives you nine spares.
What is the first accuracy limit I hit during sustained high-temperature exposure?
The polyester strip is rated to +/-2 percent accuracy across the 190 to 220 degree F range; prolonged exposure beyond 220 degrees F exceeds the calibrated range and the reading can no longer be trusted.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
