We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coil of natural 10 AWG high-temperature lead wire, 100 ft

Tempco

Tempco LDWR-1024 TGGT 10 AWG Natural 100 ft

SKU CH-AR4R-RZ05E

High-temperature lead wire rated 600 V AC and 482 °F with nickel-plated copper conductor and fiberglass-PTFE insulation, supplied in a 100 ft reel

  • TypeWire & Cable
  • Handles extreme heat with 482 °F rating
  • Delivers reliable power at 600 V AC
  • Resists corrosion via nickel-plated copper conductor
  • Withstands harsh environments using fiberglass and PTFE insulation
  • Provides ample length for wiring runs at 100 ft

High-Temperature Lead Wire

Tempco LDWR-1024 TGGT is a 10 AWG high-temperature lead wire designed for electrical and industrial installations requiring heat resistance. It features nickel-plated copper conductors with fiberglass and PTFE insulation in a natural jacket. The wire is supplied in a 100 ft length and rated for 600V AC operation.

Suited for panel wiring and heating equipment

This wire suits installers needing a 10 AWG conductor rated to 482 Degrees F for high-heat environments such as ovens, furnaces or industrial machinery. It is not intended for low-voltage signal circuits, flexible cord applications or installations requiring a lower temperature rating or different insulation system.

Capacity and headroom

The 10 AWG nickel-plated copper conductor handles 600V AC continuously while the TGGT insulation withstands temperatures up to 482 Degrees F. Headroom exists for standard industrial control panels and heating element leads. The wire runs out when an application demands a larger gauge, a higher voltage class or a temperature rating beyond the specified limit.

Highlights

  • Handles extreme heat with 482 °F rating
  • Delivers reliable power at 600 V AC
  • Resists corrosion via nickel-plated copper conductor
  • Withstands harsh environments using fiberglass and PTFE insulation
  • Provides ample length for wiring runs at 100 ft

Specifications

TypeWire & Cable
BrandTEMPCO

Questions about this item

What crimp terminals or lugs accept a 10 AWG nickel-plated copper conductor?

Use terminals rated for 10 AWG nickel-plated copper; the conductor diameter matches standard 10 AWG dimensions for crimp or screw connections.

Can this TGGT wire run in the same conduit as older 600 V PVC-insulated cables?

Yes, both are rated 600 V AC; ensure the conduit fill and temperature rating suit the 482 °F maximum of this fiberglass-PTFE jacket.

How do I verify the insulation is intact after pulling the 100 ft length?

Inspect the natural-colored fiberglass-PTFE jacket for cuts or abrasion and confirm continuity with a low-voltage ohmmeter across the full run.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.