Tempco
Tempco CSH01629 Strip Heater 30 1/2 in 240V 1250W 1200°F
A 30 1/2 in strip heater delivering 1,250 W at 240 V with a 304 stainless-steel sheath rated to 1,200 °F
- 30 1/2 in length fits standard HVAC enclosures
- 240 V 1250 W delivers 13 W/sq in for rapid heat-up
- 304 seamless stainless steel sheath resists corrosion up to 1200 °F
- CSA cURus NRTL certified to UL 499 and C22.2 No 72
- 1/2 in slotted holes on 29 1/2 in centres simplify surface mounting
Industrial Strip Heater 30 1/2 Inch 240V
The Tempco CSH01629 strip heater delivers 1250 watts at 240 volts with a maximum sheath temperature of 1200 degrees Fahrenheit. Its 304 stainless steel seamless sheath provides corrosion resistance for industrial process heating. The unit measures 30 1/2 inches overall with a 29 1/2 inch mounting dimension and surface-mount slotted holes. It suits OEMs and maintenance teams needing reliable surface heating in fixed installations.
Upgrade From Lower Watt Density Units
This heater operates at 13 watts per square inch, offering faster heat-up than lower-density alternatives when voltage and length match. The jump is worth it when existing heaters cannot reach 1200 degrees Fahrenheit or when CSA and UL 499 recognition are required for compliance. Single-phase 240V wiring must already be in place to use this model without electrical changes.
Verify Voltage Mounting And Clearance
Confirm your supply is 240 volts single-phase and that the 30 1/2 inch overall length fits the available space. The 29 1/2 inch mounting centres and 1/2 by 5/16 inch slotted holes must align with existing brackets. Ensure 10-32 screw hardware suits the mounting surface and that the 1200 degree Fahrenheit rating exceeds the process requirement without overshoot.
Highlights
- 30 1/2 in length fits standard HVAC enclosures
- 240 V 1250 W delivers 13 W/sq in for rapid heat-up
- 304 seamless stainless steel sheath resists corrosion up to 1200 °F
- CSA cURus NRTL certified to UL 499 and C22.2 No 72
- 1/2 in slotted holes on 29 1/2 in centres simplify surface mounting
Specifications
| Brand | TEMPCO |
|---|
Questions about this item
What are the slotted hole dimensions for mounting the 30 1/2 in strip heater?
The slotted mounting holes are 1/2 in long and 5/16 in wide, giving a 29 1/2 in mounting dimension for surface installation.
Which screw size secures the 10-32 terminals during wiring?
Use 10-32 screws on the parallel terminals; the step often missed is tightening them to the spec torque so the 240V connection stays secure under thermal cycling.
When should the 304 stainless sheath be inspected for replacement?
Plan to inspect the seamless 304 stainless sheath if surface discoloration appears near the 1200 °F rating or after the CSA and UL 499 service interval your maintenance schedule defines.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
