Tempco
Tempco CSH01624 Strip Heater 120V 1000W 23 3/4 in 1200 Deg F
A 120 V, 1000 W stainless-steel strip heater reaching 1200 °F with CSA and UL recognition
- ColorYellow
- Delivers 1000 W at 120 V for strong heat output
- Reaches 1200 °F maximum sheath temperature for demanding applications
- 304 stainless steel sheath resists corrosion and withstands high heat
- CSA and cURus certified to UL 499 and C22.2 No 72 standards
- Compact 23 3/4 in length fits tight surface-mount installations
Industrial Strip Heater
The Tempco CSH01624 strip heater delivers 1000 W at 120 V for surface-mount heating tasks. Its 304 stainless steel sheath reaches a maximum temperature of 1200 Degrees F. The unit suits industrial processes that require consistent, high-temperature output in a compact form.
15 W/sq in Watt Density
The heater operates at a watt density of 15 W/sq in, which sets a practical limit on heat flux for the target material. Exceeding the 1200 Degrees F sheath rating risks sheath failure and loss of UL recognition. Single-phase 120 V supply and the 23 3/4 in overall length define the electrical and spatial boundaries of the installation.
Check Mounting And Clearance
Verify that the mounting surface accommodates a 22 3/4 in mounting dimension with slotted holes measuring 1/2 in by 5/16 in for 10-32 screws. Confirm the application does not require a voltage other than 120 V or a three-phase supply. Ensure the 1000 W load is compatible with the available circuit protection.
Highlights
- Delivers 1000 W at 120 V for strong heat output
- Reaches 1200 °F maximum sheath temperature for demanding applications
- 304 stainless steel sheath resists corrosion and withstands high heat
- CSA and cURus certified to UL 499 and C22.2 No 72 standards
- Compact 23 3/4 in length fits tight surface-mount installations
Specifications
| Brand | TEMPCO |
|---|---|
| Color | Yellow |
Questions about this item
How do I choose the right wattage version of the Tempco CSH01624 strip heater?
This model is supplied at 1000 W with a 15 W/sq in watt density, so select it when your process requires that specific power and surface loading.
What does the 1200 °F maximum sheath temperature mean once the heater is installed?
It indicates the highest temperature the 304 stainless steel sheath can reach under rated conditions; your control system must keep the actual sheath temperature at or below this limit.
Which standards apply to the CSA and cURus markings and what do they cap in practice?
The heater is recognised to UL 499 and CSA C22.2 No 72, which cap the design at 120 V single-phase operation and the 1200 °F sheath-temperature ceiling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
