Tempco
Tempco CSH01230 Strip Heater 47 7/8 in 1200 Deg F 240V 250W
240 V surface-mount strip heater with 304 stainless-steel sheath rated to 1200 °F delivering 250 W at 14 W/sq in
- ColorGray
- 47 7/8 in length fits wide surface-mount applications
- 250 W at 14 W/sq in delivers consistent heat output
- 304 stainless steel sheath resists corrosion up to 1200 °F
- CSA, cURus and UL 499 listings confirm safety compliance
- Parallel terminals with 10-32 screws simplify 240 V wiring
Industrial Strip Heater 240 V 250 W
The Tempco CSH01230 is a 47 7/8 in strip heater rated for 240 V single-phase operation at 250 W. It suits process-heating tasks that require a long, surface-mounted element with a maximum sheath temperature of 1 200 Degrees F.
304 Stainless Steel Sheath Surface Mount
A seamless 304 stainless steel sheath delivers corrosion resistance while the slotted mounting holes measure 1/2 in by 5/16 in on 46 7/8 in centres for 10-32 screws. Parallel terminals simplify wiring in control cabinets or ductwork.
CSA cURus NRTL Certified 14 W/sq in
The heater carries CSA, cURus and UL 499 recognition under CCN KSOT2/8 and Canadian Standard C 22.2 No 72. At 14 W/sq in watt density it runs within recognised limits for steady industrial use without forced-air cooling.
Highlights
- 47 7/8 in length fits wide surface-mount applications
- 250 W at 14 W/sq in delivers consistent heat output
- 304 stainless steel sheath resists corrosion up to 1200 °F
- CSA, cURus and UL 499 listings confirm safety compliance
- Parallel terminals with 10-32 screws simplify 240 V wiring
Specifications
| Brand | TEMPCO |
|---|---|
| Color | Gray |
Questions about this item
What does the 240 V rating mean for the maximum sheath temperature in practice?
The heater is designed for a maximum sheath temperature of 1 200 °F when operated at 240 V single phase, delivering 250 W at 14 W/sq in.
What are the mounting dimensions and slotted hole sizes for the 47 7/8 in strip heater?
The mounting dimension is 46 7/8 in with slotted holes 1/2 in long by 5/16 in wide for 10-32 screws.
How is the surface-mount strip heater wired during installation?
Terminals are parallel; connect the 240 V supply to both terminals and secure the heater with 10-32 screws through the slotted holes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
