Tempco
Tempco BCH00018 240V 1400°F 6 in hvac control
A 240 V mica-insulated band heater delivering 1 000 W at up to 1 400 °F for 6 in width applications
- Delivers up to 1400°F for demanding thermal processes
- 1000 W output at 240 V ensures strong, consistent heat
- Mica insulation provides reliable dielectric protection at temperature
- 10/32 screw terminals give secure, repeatable wiring connections
- 24 W/sq in density balances rapid heat-up with element longevity
Tempco BCH00018 240V band heater
The Tempco BCH00018 is a mica-insulated band heater designed for industrial heating applications. It operates at 240V with a 1000 W output and a 2 3/8 in inside diameter. This unit suits maintenance teams and OEMs needing reliable conductive heat for cylinders or pipes.
Sustained load performance
Ceramic insulated fiber construction supports continuous operation up to 1400 Degrees F. The heater delivers a watt density of 24 W/sq in while drawing 4.17 A at rated voltage. Width tolerance of +/-1/16 in ensures consistent contact and heat transfer over long duty cycles.
Terminal box with 10/32 screw terminals
Electrical connection uses a terminal box fitted with 10/32 screw terminals for secure wiring. This termination style suits panels and enclosures where ring or fork lugs are preferred. Buyers needing quick-disconnect plugs or bare leads should verify compatibility before ordering.
Highlights
- Delivers up to 1400°F for demanding thermal processes
- 1000 W output at 240 V ensures strong, consistent heat
- Mica insulation provides reliable dielectric protection at temperature
- 10/32 screw terminals give secure, repeatable wiring connections
- 24 W/sq in density balances rapid heat-up with element longevity
Specifications
| Brand | TEMPCO |
|---|
Questions about this item
How hot does the 240 V, 1 000 W band heater get during continuous operation?
The unit is rated for a maximum temperature of 1 400 °F, so it will reach that level when running at full power.
What electrical supply and wiring are required to install this 240 V mica-insulated heater?
A 240 V circuit capable of at least 4.17 A with 10/32 screw-terminal connections is needed.
Will the 2 3/8 in inside diameter fit the 6 in wide barrels on our older extrusion line?
Yes, the heater is built for a 2 3/8 in inside diameter and 6 in width with a ±1/16 in tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
