Telemecanique Sensors
Telemecanique Sensors XCKT2118N12 limit switch roller lever rotary 1NC/1NO line protection
A miniature limit switch with a 1.3 in roller lever actuator, 1NC/1NO contacts rated 10A at 240V AC/DC, and NEMA 1, 2, 4, 6, 12, 13 enclosure rating
- Roller-lever actuator enables side-mount operation
- 1NC/1NO contacts provide both open and closed circuits
- Rated 10A at 240V AC and DC for line protection
- Miniature body fits tight spaces at 2.28 in wide
- NEMA 1, 2, 4, 6, 12, 13 ratings suit harsh environments
Industrial limit switch for position sensing
The Telemecanique Sensors XCKT2118N12 is a miniature rotary limit switch with a roller lever actuator. It provides 1NC/1NO contact configuration for monitoring mechanical position in industrial equipment. The switch suits automation systems that require reliable end-of-travel or sequence detection.
Side-mounted roller lever with screw terminals
The actuator is located on the side of the body and operates through rotary motion. Wiring connects to screw terminals on the miniature housing. The roller lever requires correct alignment with the moving part; misalignment causes premature wear or missed actuation. The boot-sealed actuator is not fitted, so debris can enter the mechanism in dirty environments.
Check voltage, current
The switch carries a 10 A rating at 240 V for both AC and DC circuits. Verify that your control circuit voltage and load current stay within this rating. The body measures 2 in high, 2.28 in wide and 1.18 in deep with a 1.3 in actuator length. Confirm the mounting holes and clearance match your enclosure. The NEMA 1, 2, 4, 6, 12, 13 rating covers indoor and outdoor use but not hazardous locations.
Highlights
- Roller-lever actuator enables side-mount operation
- 1NC/1NO contacts provide both open and closed circuits
- Rated 10A at 240V AC and DC for line protection
- Miniature body fits tight spaces at 2.28 in wide
- NEMA 1, 2, 4, 6, 12, 13 ratings suit harsh environments
Specifications
| Brand | TELEMECANIQUE SENSORS |
|---|
Questions about this item
How can I verify the XCKT2118N12 is operating correctly after installation?
Actuate the roller lever and confirm the 1NC/1NO contacts change state; the switch is rated for 10 A at 240 V AC and DC.
What is included with the XCKT2118N12 and what must be purchased separately?
The limit switch itself is supplied; mounting hardware, wiring and any required conduit are not included.
Which version of the XCKT2118N12 should I choose for my application?
This model has a fixed 1.3 in roller lever, miniature body (2 in high, 2.28 in wide, 1.18 in deep) and NEMA 1, 2, 4, 6, 12, 13 rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
