TEKTON
TEKTON SRH22214 1/2 Inch Drive 14 Inch Flex Head Comfort Grip Ratchet
A 1/2 inch drive ratchet with a 14 inch handle, 90 tooth gear producing a 4 degree swing arc, 180 degree flex head with nine detent positions, and a comfort grip
- 90-tooth gear gives a 4-degree swing arc for tight spaces
- 180-degree flex head locks at nine angles to clear obstructions
- Reduced head profile fits where standard ratchets cannot
- Chrome-plated finish resists corrosion and wipes clean easily
- Oval comfort grip supports palm and fingers during push or pull
TEKTON 1/2 Inch Drive 14 Inch Ratchet
This TEKTON ratchet uses a 1/2 inch drive and measures 14 inches long for extended reach in automotive and mechanical work. The 90-tooth gear creates a 4-degree swing arc so the tool turns fasteners in tight spaces. Its 180-degree flex head locks at nine detent angles to clear obstructions. The reduced head profile fits where bulkier ratchets cannot.
Installing sockets and setting the head angle
Sockets press onto the 1/2 inch square drive and release with the quick-release button on the head. Rotate the flex head until it clicks into one of nine detent positions to hold the working angle. The comfort grip's rounded oval shape supports the palm during high-torque pushes or pulls. Dirt or grit in the gear mechanism can stiffen the action; wipe the chrome finish clean and keep the pawl area free of debris.
Limits of the 90-tooth mechanism and flex joint
The 4-degree arc reduces the room needed to turn a fastener but does not eliminate the need for some swing space. At extreme flex angles the head length adds leverage that can exceed the joint's holding force if abused. Chrome plating resists corrosion yet can wear where sockets repeatedly engage. The tool is built for hand torque only; striking or using a cheater bar will damage the gear teeth and flex mechanism.
Highlights
- 90-tooth gear gives a 4-degree swing arc for tight spaces
- 180-degree flex head locks at nine angles to clear obstructions
- Reduced head profile fits where standard ratchets cannot
- Chrome-plated finish resists corrosion and wipes clean easily
- Oval comfort grip supports palm and fingers during push or pull
Specifications
| Brand | TEKTON |
|---|
Questions about this item
How can I confirm the 90-tooth gear is delivering the 4-degree swing arc after setup?
Operate the ratchet in a tight space; each click should advance the fastener with only a 4-degree handle movement, proving the 90-tooth mechanism is engaged.
What comes in the box with the TEKTON SRH22214 and what must I purchase separately?
The box contains the 1/2-inch drive 14-inch flex-head ratchet with comfort grip; sockets, extensions or adapters are sold separately.
Which drive size and length combination should I choose for general automotive work?
The 1/2-inch drive by 14-inch length offers the leverage and reach needed for most automotive fasteners while the flex head clears obstructions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
