Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.0099484BTC
In stock
teds
teds 52mm Tulip Lens Hood for Canon 24mm & 40mm f/2.8 camera accessory
A 52mm tulip hood that blocks stray light to prevent flare on Canon 24mm and 40mm f/2.8 lenses
- TypeLens Hood
- Reduces lens flare by blocking stray light
- Protects front barrel from bumps and debris
- Fits 52mm filter thread on Canon 24mm f/2.8 and 40mm f/2.8 STM lenses
- Tulip shape designed for internal-focus optics
- Keeps moisture and wind-blown particles off the glass
Compatible Lenses
This tulip-shaped hood fits Canon 24mm f/2.8 STM and 40mm f/2.8 STM lenses that accept 52mm filters. It is designed for internal-focus optics so the front element does not rotate during focusing. Photographers who want to reduce flare without adding bulk will find it a direct match for these two primes.
Snap-On Installation
The hood presses onto the 52mm filter threads and locks with a quarter-turn bayonet action. No tools or adapters are required, but cross-threading can occur if the hood is forced before the threads engage fully. Users should align the index mark, turn gently until a click is felt, and verify that the petals sit square to avoid vignetting at wide apertures.
Sustained Outdoor Use
Under prolonged shooting in bright conditions the matte interior absorbs stray reflections that would otherwise lower contrast. The rigid plastic shell also shields the front glass from rain, dust and accidental knocks against door frames or walls. Because the petals are optimised for the 24mm and 40mm focal lengths, shading remains consistent even during extended sessions.
Highlights
- Reduces lens flare by blocking stray light
- Protects front barrel from bumps and debris
- Fits 52mm filter thread on Canon 24mm f/2.8 and 40mm f/2.8 STM lenses
- Tulip shape designed for internal-focus optics
- Keeps moisture and wind-blown particles off the glass
Specifications
| Type | Lens Hood |
|---|
Questions about this item
How can I confirm the tulip hood is blocking stray light on my Canon 24mm f/2.8 STM?
Shoot a high-contrast scene with the sun just outside the frame; if flare spots disappear compared to bare-lens shots, the hood is working.
What comes in the box and do I need a separate adapter ring for 52mm threads?
The hood itself is included; it threads directly onto 52mm filter threads so no adapter is required.
Should I choose this 52mm tulip hood for the Canon 40mm f/2.8 STM or the 24mm f/2.8 STM?
Both lenses share a 52mm filter size, so this single hood fits either one.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
