We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical steel QD bushing with split flange and three cap screws

Tb Wood'S

Tb Wood'S SD1716 QD Bushing 1 7/16 in Bore 1.813 in Length

SKU CH-6WNZ-N5B6C

Quick-detachable steel bushing with 1 7/16 in bore, 1.813 in length, and 2.69 in bolt circle for keyed shafts

  • Quick-detach design speeds installation and removal
  • 1 7/16 in bore fits standard keyed shafts
  • 813 in overall length with 1.375 in usable length
  • Grade 5 steel construction handles high torque loads
  • Includes three cap screws for immediate assembly

SD QD Bushing 1 7/16 in Bore

This steel quick-detachable bushing fits a 1 7/16 inch keyed shaft and uses a 3/4 inch per foot taper for secure clamping. The SD series design includes three Grade 5 cap screws and a split flange for straightforward installation and removal in power transmission assemblies.

For maintenance crews needing fast changeover

Technicians who require a split-flange bushing with a 1 7/16 inch bore and 1.813 inch length will find this part matches the specification. It does not suit shafts with different diameters, non-keyed profiles, or applications requiring a longer bearing surface or metric dimensions.

1.813 in overall length

The overall length of 1.813 inches determines the axial space the bushing occupies on the shaft. Verify this dimension against your hub and clearance requirements before ordering.

Highlights

  • Quick-detach design speeds installation and removal
  • 1 7/16 in bore fits standard keyed shafts
  • 813 in overall length with 1.375 in usable length
  • Grade 5 steel construction handles high torque loads
  • Includes three cap screws for immediate assembly

Specifications

No published specifications for this item yet.

Questions about this item

What bolt circle diameter does the SD series QD bushing use for mounting?

The SD bushing mounts on a 2.69 in bolt circle using three 1/4-20 x 1-7/8 in cap screws.

What shaft diameter and keyway dimensions does the 1 7/16 in bore bushing accept?

It fits a 1 7/16 in keyed shaft with a 3/8 in wide by 3/16 in high keyway.

How are the three cap screws tightened to seat the split-flange bushing correctly?

Tighten the three cap screws evenly in a star pattern to draw the split flange uniformly onto the shaft.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.