We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel quick-detachable bushing, split flange, 1 3/8 inch bore, 1.813 inch length

Tb Wood'S

Tb Wood'S SD138 Quick Detachable Bushing 1 3/8 in Bore 1.813 in Length

SKU CH-57G2-XYFEW

Quick detachable steel bushing with 1 3/8 in bore, 1.813 in length, 2.69 in bolt circle and three included cap screws for keyed shafts

  • Quick detach design speeds component changes
  • 1 3/8 in bore fits standard keyed shafts
  • 813 in length suits SD series hubs
  • Steel construction meets SAE Grade 5 strength
  • Includes three cap screws for secure mounting

Quick Detachable Bushing for 1 3/8 in Shaft

The Tb Wood's SD138 is a steel split-flange bushing designed for keyed shafts with a 1 3/8 inch bore. It provides a secure, keyless connection between shaft and driven component in power transmission assemblies. The SAE Grade 5 construction suits industrial machinery and machine shop applications.

Replaces pressed or set-screw bushings on SD

The 3/4 in per ft taper and three included cap screws allow faster installation and removal without damaging the shaft. The jump is worth it when frequent changeovers or precise axial positioning are required on 1.375 in length-less-flange hubs. It eliminates the need for heat or pullers during maintenance.

Fits SD series hubs with 2.69 in bolt circle

The 2.188 in bushing diameter and 7/16 in flange width match the hub register, while the 1/4-20 x 1-7/8 in cap screws clamp the split flange evenly. This frees up assembly time and avoids shaft marring. Buyers needing a different bore diameter or a non-SD taper series cannot use this bushing.

Highlights

  • Quick detach design speeds component changes
  • 1 3/8 in bore fits standard keyed shafts
  • 813 in length suits SD series hubs
  • Steel construction meets SAE Grade 5 strength
  • Includes three cap screws for secure mounting

Specifications

No published specifications for this item yet.

Questions about this item

What bolt circle diameter does the SD138 bushing need for mounting?

The bushing requires a 2.69 in bolt circle diameter and uses three 1/4 in -20 x 1-7/8 in cap screws for secure attachment.

How do you install the split-flange SD bushing on a keyed shaft, and what step is often missed?

Slide the bushing onto the shaft, align the 3/8 in keyway width and 3/16 in keyway height, then tighten the three cap screws evenly; skipping the even-torque sequence can leave the split flange misaligned.

When should the steel SD138 bushing be replaced due to wear?

Replace the bushing if the 1.375 in taper length shows fretting, the 3.188 in overall diameter exceeds tolerance, or the keyway walls deform under SAE Grade 5 loading.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.