We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical steel QD bushing, split flange, 4.438 in OD, 3 in bore

Tb Wood'S

Tb Wood'S QD Bushing Series F 3 in Bore 4.438 in OD

SKU CH-YVAF-2FZDK

Quick-detach steel bushing fits a 3 in keyed shaft with a 4.438 in bore and 5.63 in bolt circle

  • Quick-detach design speeds up shaft mounting
  • SAE Grade 5 cap screws deliver rated clamping force
  • 3 in bore fits standard keyed shafts directly
  • 438 in bushing diameter matches Series F hubs
  • Split flange eases installation and removal

QD Bushing Series F 3 in Bore

The TB Wood's QD bushing is a quick-detachable steel component designed for power transmission assemblies. It fits a 3 in keyed shaft and uses a split flange for straightforward mounting and removal without special tools.

Upgrades from pressed-on or set-screw hubs

This bushing replaces hubs that require heating or hammering for installation. The taper of 3/4 in per foot and three included SAE Grade 5 cap screws on a 5.63 in bolt circle provide a secure, repeatable fit when frequent changes are needed.

Suits maintenance crews

It suits teams that standardise on Series F dimensions and need a 3 in bore with a 4.438 in bushing diameter. Shops using a different bore series or a non-keyed shaft should look at another bushing type.

Highlights

  • Quick-detach design speeds up shaft mounting
  • SAE Grade 5 cap screws deliver rated clamping force
  • 3 in bore fits standard keyed shafts directly
  • 438 in bushing diameter matches Series F hubs
  • Split flange eases installation and removal

Specifications

No published specifications for this item yet.

Questions about this item

What bore diameter and keyway dimensions does the Series F bushing use for a 3 in shaft?

The bushing has a 3 in bore, a 3/4 in keyway width and a 3/8 in keyway height.

What bolt circle diameter and cap-screw size are needed to mount the split flange?

The bolt circle is 5.63 in and the kit includes three 9/16-12 x 3-5/8 in SAE Grade 5 cap screws.

When should the bushing be inspected or replaced after installation?

Inspect the taper contact, keyway fit and cap-screw torque at scheduled shutdowns; replace if fretting, elongation or visible wear appears.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.