Tb Wood'S
Tb Wood'S JA 19 mm Quick Detachable Bushing collectible
A quick-detachable steel bushing with a 19 mm bore, 1 in length and 1.66 in bolt circle for keyed shafts
- TypeBearings, V-belts & Power Transmission Equipment
- ColorTransparent
- Quick-detach design speeds belt changes
- 19 mm bore fits metric shafts precisely
- SAE Grade 5 steel handles high torque loads
- Split flange eases installation on keyed shafts
- Three cap screws included for secure mounting
TB Wood'S JA 19 mm Quick Detachable Bushing
This new TB Wood'S bushing is a 19 mm bore quick detachable component for power transmission assemblies. It fits keyed shafts and includes three cap screws for installation. The steel construction meets SAE Grade 5 specifications.
Suits 19 mm metric shafts needing a split flange
Buyers needing a different bore diameter or a non split flange design should look elsewhere. This bushing uses #10-24 x 1 in bolts on a 1.66 in bolt circle. It is not intended for shafts outside the JA series specification.
19 mm bore diameter with 3/4 in per ft taper
The 19 mm bore diameter and 3/4 in per ft taper determine shaft compatibility. Keyway dimensions are 6 mm width by 2.9 mm height. Overall diameter measures 2 in with a 1.375 in bushing diameter. Length less flange is .688 in.
Highlights
- Quick-detach design speeds belt changes
- 19 mm bore fits metric shafts precisely
- SAE Grade 5 steel handles high torque loads
- Split flange eases installation on keyed shafts
- Three cap screws included for secure mounting
Specifications
| Brand | TB WOODS |
|---|---|
| Type | Bearings, V-belts & Power Transmission Equipment |
| Color | Transparent |
Questions about this item
Does the JA 19 mm bushing ship with mounting hardware or must I order cap screws separately?
The package includes three SAE Grade 5 cap screws sized #10-24 x 1 in so no separate fastener purchase is required.
How do I decide between the JA series and another bore series for my shaft?
Choose the JA series when the shaft diameter is 19 mm, the keyway measures 6 mm wide by 2.9 mm high and the bolt circle is 1.66 in.
What does the 3/4 in per foot taper mean when the bushing is installed on a keyed shaft?
The taper locks the 1.375 in bore tightly onto the shaft over the 0.688 in grip length, transmitting torque through the 6 mm keyway without setscrews.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tour Edge Golf Mfg. Inc.
Tour Edge Golf Mfg. Inc. pdprsu0138 golf accessory
- Toys and Games
$58.99
0.00070985BTC
In stock