We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Split-flange steel QD bushing, 2-15/16 inch bore, 6.625 inch OD, 3.625 inch length

Tb Wood'S

Tb Wood'S F21516 QD Bushing Series F 2-15/16 in Bore

SKU CH-JZRD-6KQBV

Quick-detachable steel bushing with 2-15/16 in bore, 3.625 in length and 5.63 in bolt circle for keyed shafts

  • Quick-detachable design speeds up installation and removal
  • Split flange simplifies alignment on keyed shafts
  • Grade-5 cap screws provide secure clamping force
  • 2-15/16 inch bore fits large-diameter shafts directly
  • 625 inch length supports wide hub engagement

Tb Wood's F21516 QD Bushing Series F

This quick-detachable steel bushing fits a 2-15/16 inch bore on keyed shafts. It belongs to the Series F range and uses a 3/4 inch per foot taper for secure mounting. The unit suits industrial power-transmission assemblies requiring a 4.438 inch bushing diameter.

Includes three SAE Grade 5 cap screws

The supplied hardware matches the 9/16-12 thread and 3-5/8 inch length specified for the 5.63 inch bolt circle. This eliminates separate fastener sourcing and ensures the clamping force meets the design grade. The split flange eases installation and removal without disturbing hub alignment.

Steel and iron construction with split flange

The 6.625 inch overall diameter and 3.625 inch total length provide a compact footprint for the given bore. A 13/16 inch flange width and 2.813 inch length less flange define the mounting envelope. The 3/4 inch keyway width and 3/8 inch height accommodate standard key stock for torque transmission.

Highlights

  • Quick-detachable design speeds up installation and removal
  • Split flange simplifies alignment on keyed shafts
  • Grade-5 cap screws provide secure clamping force
  • 2-15/16 inch bore fits large-diameter shafts directly
  • 625 inch length supports wide hub engagement

Specifications

No published specifications for this item yet.

Questions about this item

Will the 9/16 in. -12 x 3-5/8 in. cap screws need periodic re-torquing or replacement?

The three SAE Grade 5 cap screws should be checked after initial run-in and re-torqued if vibration occurs; replace only if threads strip or heads round off during service.

What dimensional limit is reached first when the bushing operates continuously at high torque?

The 3/4 in. per ft. taper and 3.625 in. overall length determine the maximum grip before the split flange seats fully against the hub face.

How much heat does the steel bushing generate during all-day operation on a keyed shaft?

Steel construction dissipates frictional heat through the 4.438 in. bushing diameter and 6.625 in. overall diameter; no active cooling is required for normal power-transmission duty.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.