We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal V-belt pulley with two grooves and quick-detachable bushing, 10.3 inch diameter

Tb Wood'S

Tb Wood'S 5V1032 10.3 in 2 Groove Quick Detachable V-Belt

SKU CH-P7BM-YCSHB

A 10.3 in pitch diameter V-belt pulley with two grooves and a quick-detachable bushed bore

  • 3 in pitch diameter suits 5V and 5VX belts
  • Quick-detachable bore 1/2 in to 2-1/2 in speeds up changes
  • Two-groove design handles higher power loads
  • TB Woods brand backs reliable power transmission
  • New condition ensures full service life from day one

10.3 in 2 Groove Quick Detachable V-Belt

The Tb Wood'S 5V1032 is a two groove V-belt pulley designed for power transmission applications. It uses a Quick Detachable bushing system for straightforward installation and removal on machinery shafts.

Upgrade from fixed bore or single groove pulleys

This pulley replaces fixed bore types that require precise shaft matching and allows a quick change of bushing sizes from 1/2 in to 2-1/2 in. The jump is worth it when maintenance speed and shaft flexibility are priorities over a permanent press fit.

Limited to 5V and 5VX belt profiles at 10.3

The pulley accepts only 5V and 5VX section belts at the stated 10.3 in pitch diameter. It does not support 3V, 4L, A, B, C or other belt profiles, so the drive design must match these exact specifications.

Highlights

  • 3 in pitch diameter suits 5V and 5VX belts
  • Quick-detachable bore 1/2 in to 2-1/2 in speeds up changes
  • Two-groove design handles higher power loads
  • TB Woods brand backs reliable power transmission
  • New condition ensures full service life from day one

Specifications

No published specifications for this item yet.

Questions about this item

What bore range does the quick-detachable bushing on this 5V1032 pulley accept?

The quick-detachable bushing fits shafts from 1/2 inch to 2-1/2 inch, allowing direct mounting without a separate keyed hub.

Which step is most often missed when installing the 2-groove 5V1032 pulley onto its bushing?

Torque the bushing cap screws evenly in a star pattern to the specified value; uneven tightening can crack the flange or leave the pulley eccentric.

How do I know when the 5V1032 pulley grooves need replacement?

Inspect the two 5V/5VX grooves for sidewall wear exceeding 1/32 inch or visible scoring; replace the pulley when belt ride height drops noticeably.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.