We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular white box with one input and four output Ethernet ports

TAURKENAM

TAURKENAM POE Extender 4-Port 10/100M IEEE802.3at to IEEE802.3af

SKU CH-Z1V0-YGWEV

A 4-port PoE extender delivers 25.5 W total power to IP cameras, access points or phones over Cat5 cable up to 120 m

  • TypeAccessories
  • Extends PoE network reach up to 120 metres over Cat5 UTP cable
  • Powers four devices from a single PoE+ input with 25.5 W total budget
  • Delivers up to 15.4 W per port for IP cameras, APs or VoIP phones
  • IEEE 802.3at in to IEEE 802.3af out for broad device compatibility
  • Mode A end-span pinout (1/2+, 3/6-) ensures standard wiring compliance

Four-port PoE extender for remote devices

This PoE-powered switch accepts IEEE 802.3at input and delivers IEEE 802.3af power to four RJ45 ports. It suits installers who need to run access points, IP cameras or IP phones beyond the reach of a mains outlet. The unit draws up to 25.5 W from the upstream link and shares 24 W across the four outputs.

Sustained load behaviour with shared power budget

Each port can supply a maximum of 15.4 W, but the 25.5 W total input prevents all four ports from reaching that limit simultaneously. Under continuous operation the combined draw must stay below 25.5 W, so high-consumption devices should be balanced across the ports. The 10/100 Mbit/s links maintain steady throughput within the 120 m cable limit.

Compact relay with Mode A pinout and Cat5 reach

The extender uses a 1/2 (+), 3/6 (−) Mode A end-span arrangement on standard RJ45 connectors, requiring no external power brick. Cat5 or better UTP cable runs of 100–120 m are supported with quality cable; poorer cable may reduce reliable distance to around 80 m. No mounting hardware is described, so the unit sits inline wherever the cable terminates.

Highlights

  • Extends PoE network reach up to 120 metres over Cat5 UTP cable
  • Powers four devices from a single PoE+ input with 25.5 W total budget
  • Delivers up to 15.4 W per port for IP cameras, APs or VoIP phones
  • IEEE 802.3at in to IEEE 802.3af out for broad device compatibility
  • Mode A end-span pinout (1/2+, 3/6-) ensures standard wiring compliance

Specifications

TypeAccessories

Questions about this item

Does the TAURKENAM POE Extender run hot or draw much power when operating continuously?

The unit takes up to 25.5W from the PoE input and delivers a total of 24W across the four output ports, so its own dissipation is minimal — little heat for all-day operation.

What must I already have to power this 4-port extender?

You need a single IEEE 802.3at PoE source (such as a PoE+ switch or injector) feeding the input RJ45, plus Cat5 or better UTP cable runs under 120 m to each connected device.

Will my older 802.3af cameras and phones work on the four output ports?

Yes — each output port supplies up to 15.4W under the 802.3af standard, compatible with legacy PoE devices, provided the combined draw stays below 24W.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.