We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 16-pin OBD2 Y splitter cable with one male and two female connectors, 50cm length

TAURKENAM

TAURKENAM OBD2 16 Pin Y Splitter 1 Male 2 Female 50cm/20in 26AWG car electronics accessory

SKU CH-6V2W-HYNKD

A 16-pin OBD2 Y-splitter connects two devices simultaneously while keeping the port accessible, with a 50 cm cable and 26 AWG wiring

  • Typetype
  • Connect tuner and diagnostic tool simultaneously
  • 1 male to 2 female OBDII Y splitter
  • Conceal fleetmatics or telematics device under dash
  • Retain original OBDII port position with underdash mount
  • 50 cm cable with full 16 pin connection

16-Pin OBDII Y Splitter

This 16-pin OBDII Y splitter provides one male and two female J1962 connectors so two devices can share a single diagnostic port. The 50 cm cable lets the second socket sit under the dash while the original port stays accessible. All six pins are connected on every branch. It is sold as a new accessory in a pack of five.

For multi-device diagnostics.

Technicians who run a tuner and a scan tool together, or fleet managers who keep a telematics dongle plugged in while servicing, will find this splitter convenient. Installers who need galvanic isolation, signal buffering or voltage translation between the two female sockets should look elsewhere because the adapter is a passive straight-through harness.

Six-pin full continuity

Every circuit from the male plug carries through to both female sockets without interruption, so any tool that relies on all six J1962 pins will function on either branch. Buyers whose equipment needs more than the six connected pins cannot use this splitter.

Highlights

  • Connect tuner and diagnostic tool simultaneously
  • 1 male to 2 female OBDII Y splitter
  • Conceal fleetmatics or telematics device under dash
  • Retain original OBDII port position with underdash mount
  • 50 cm cable with full 16 pin connection

Specifications

Typetype

Questions about this item

How can I confirm the TAURKENAM OBD2 splitter is functioning correctly after plugging it in?

Both connected devices should power on and communicate simultaneously; the mechanic's scan tool must read live data without unplugging the tuner or telematics unit.

What comes in the box and is anything else required to install it?

The pack contains five Y splitter cables, each with a 16 pin male plug and two female sockets on 50 cm 26 AWG leads plus an underdash mount bracket; no extra parts are needed.

Which pin-out version should I choose for full diagnostic access?

Select the full 6 pin connected variant (J1962) so all 16 pin signals pass through to both female ports for complete scanner and tuner operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.