We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

TAURKENAM

TAURKENAM Gigabit PoE Injector 15.4W 100m 802.3af TPE-113GI

SKU CH-6X37-5NWXJ

Adds 15.4W PoE power to a Gigabit link up to 100 metres with auto-sensing and wall-mount flexibility

  • TypeAccessories
  • Powers PoE devices up to 15.4W via IEEE 802.3af standard
  • Extends network reach up to 100 meters over single Ethernet cable
  • Auto-sensing technology delivers correct wattage for connected devices
  • Wall-mountable design fits diverse installation scenarios with no configuration needed
  • Converts standard Gigabit port to PoE Gigabit port instantly

TRENDnet Gigabit PoE Injector 15.4W

This TRENDnet injector adds IEEE 802.3af Power over Ethernet to a standard Gigabit network link. It supplies up to 15.4W of power alongside data over a single Ethernet cable. The unit connects a non-PoE switch port to a PoE-capable device such as an access point or IP camera. No software configuration is required for operation.

Installers needing a single PoE port without a PoE

The device suits network technicians adding one powered device to an existing non-PoE infrastructure. It supports cable runs up to 100 meters (328 ft) while maintaining full Gigabit throughput. Auto-sensing circuitry delivers the correct wattage to the connected endpoint. A wall-mountable chassis allows flexible placement in wiring closets or on surfaces.

15.4W 802.3af power budget

The injector complies with the IEEE 802.3af standard and provides a maximum of 15.4W at the source port. Verify that the powered device draws less than this limit before deployment. Devices requiring the higher 802.3at (PoE+) power level will not operate correctly with this unit. The single PoE output port serves one endpoint only.

Highlights

  • Powers PoE devices up to 15.4W via IEEE 802.3af standard
  • Extends network reach up to 100 meters over single Ethernet cable
  • Auto-sensing technology delivers correct wattage for connected devices
  • Wall-mountable design fits diverse installation scenarios with no configuration needed
  • Converts standard Gigabit port to PoE Gigabit port instantly

Specifications

TypeAccessories

Questions about this item

How do I install the TPE-113GI injector and what step is often missed?

Connect a non-PoE Gigabit Ethernet port to the injector's Gigabit port, then run an Ethernet cable from the PoE port to the powered device up to 100 meters; the step often missed is verifying the device draws no more than 15.4W so auto-sensing can deliver correct wattage.

What maintenance or replacement will the TPE-113GI need over time?

The injector has no moving parts or user-serviceable components; if the 15.4W 802.3af power delivery fails, the entire unit must be replaced.

What limit appears first when the TPE-113GI runs continuously at full load?

The 15.4W power budget caps the connected device; exceeding it causes the injector to shut down or the device to malfunction before cable distance becomes an issue.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.