We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal monitor arm on tall 31.5in pole with clamp and grommet base

TAURKENAM

TAURKENAM Extra Tall Single Monitor Arm 31.5in pole 32in 22lbs office equipment

SKU CH-8CP6-Z4W6R

Extra-tall single monitor arm with a 31.5in pole holds displays up to 32in and 22lbs, offering tilt, swivel, 360° rotation and VESA 75x75mm or 100x100mm mounting via C-clamp or grommet base

  • TypeMonitor Stand
  • Supports monitors up to 32 inches and 22 lbs
  • VESA 75x75mm and 100x100mm compatible plates
  • C-clamp and grommet base fit desks up to 4 thick
  • Arms tilt ±90°, swivel and rotate 360° for portrait mode
  • 5 inch pole height adjusts screen to eye level

Extra Tall Single Monitor Arm

The TAURKENAM single monitor arm mounts one flat-panel screen up to 32 inches and 22 lbs. It suits office workers who need a higher vertical range than standard poles provide. The 31.5 inch pole places the display well above typical desk height for standing or elevated seating.

Installation and Common Issues

The kit includes both a two-stage locking C-clamp and a grommet base for desks up to 4 inches thick. Detachable VESA plates fit 75x75 mm and 100x100 mm patterns. Misaligned plate holes or over-tightened clamp screws are the usual causes of wobble or stripped threads.

Compatibility Checklist

Verify your monitor weighs 22 lbs or less and uses a 75x75 mm or 100x100 mm VESA pattern. Confirm desk thickness does not exceed 4 inches and that the surface can accept either a clamp or a grommet hole. Ensure 31.5 inches of vertical clearance is available behind the desk.

Highlights

  • Supports monitors up to 32 inches and 22 lbs
  • VESA 75x75mm and 100x100mm compatible plates
  • C-clamp and grommet base fit desks up to 4 thick
  • Arms tilt ±90°, swivel and rotate 360° for portrait mode
  • 5 inch pole height adjusts screen to eye level

Specifications

TypeMonitor Stand

Questions about this item

How do I confirm the 31.5in pole holds my monitor at the right ergonomic height after setup?

Adjust the arm on the pole until the top of the screen sits at or slightly below eye level while you sit upright; the mount supports +/-90° tilt and 360° rotation so you can fine-tune the viewing angle without moving the pole.

What mounting hardware is included and do I need to buy a separate grommet or clamp kit?

The box contains the extra-tall single monitor mount, a mounting hardware kit with both a two-stage C-clamp and a 4-diameter grommet base for desks up to 4 thick, plus a user manual — no extra mounting kit is required.

My screen is 32in and 22lbs with 100x100mm VESA holes — is this the correct version?

Yes, this mount fits flat-panel monitors up to 32in and 22lbs, and the detachable plates adjust for both 75x75mm and 100x100mm VESA patterns.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.