TAURKENAM
TAURKENAM EC 92mm x 25mm Axial Cooling Fan AC 110v 120v 220v 240v Dual Ball Bearing
92 mm EC axial fan with dual ball bearings runs on 90–270 V AC, delivers 54.8 CFM at 2400 RPM and 35 dBA, and includes a 4.9 ft cord with on/off switch
- Compact 92 mm frame fits tight enclosures
- Wide 90 V to 270 V input covers global mains voltages
- 8 CFM airflow at 2400 RPM clears heat from small cabinets
- Dual ball bearing rated for 50000 hours of continuous operation
- Built-in on/off switch adds convenience for hard-to-reach mounting
Product identity
This TAURKENAM axial cooling fan measures 92 mm by 25 mm and runs on AC input from 90 V to 270 V. It delivers 54.8 ±10 % CFM at 2 400 RPM while drawing 2.0 W and producing 35 dBA noise. Dual ball bearings and an EC motor rated for 50 000 hours give long service life, and a built‑in on/off switch plus a 4.9 ft AC plug simplify installation.
Fit and alternatives
The fan suits installers who need a compact, wide‑voltage exhaust unit for cabinets, networking gear, projectors or small enclosures where an integrated switch is convenient. It is not intended for builders who require higher static pressure, variable speed control, or a different mounting footprint than the 92 mm square frame.
Deciding specification
The critical figure is the 90 V to 270 V AC operating range, which lets the same unit work on 110 V, 120 V, 220 V or 240 V mains without a separate transformer. If your supply falls outside that window, or if you need PWM speed regulation, this model will not meet the requirement.
Highlights
- Compact 92 mm frame fits tight enclosures
- Wide 90 V to 270 V input covers global mains voltages
- 8 CFM airflow at 2400 RPM clears heat from small cabinets
- Dual ball bearing rated for 50000 hours of continuous operation
- Built-in on/off switch adds convenience for hard-to-reach mounting
Specifications
No published specifications for this item yet.
Questions about this item
Which voltage version should I choose for a UK mains supply?
The fan runs on 90 V to 270 V AC, so a single unit covers 110 V, 120 V, 220 V and 240 V supplies without needing a separate model.
What does the 54.8 CFM airflow figure mean when the fan is installed in a cabinet?
At 2400 RPM the fan moves 54.8 CFM with 0.25 in H₂O static pressure, enough to push air through typical cabinet filters and component layouts.
How does the dual ball bearing affect the fan's service life on continuous duty?
The dual ball bearing is rated for 50,000 hours of continuous operation, far exceeding sleeve-bearing designs in high-temperature or 24/7 use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
