TAURKENAM
TAURKENAM DYNK01 G3HTA036H laptop battery 7.57V 45.2Wh 5970mAh 4-cell black
Replacement lithium-ion battery for Microsoft Surface 1st Gen and Surface Laptop 13.5-inch models, 7.57 V, 45.2 Wh, 5970 mAh, four cells, up to 500 recharge cycles
- Battery TypeLithium-Ion
- Replaces original DYNK01 and G3HTA036H part numbers
- Fits Microsoft Surface 1st Gen 1769 and 1782 13.5-inch models
- 2Wh 5970mAh capacity restores full runtime
- Lithium-ion chemistry rated for 500 recharge cycles
- CE and UL certified for safety compliance
Replacement Battery for Surface 1st Gen
This lithium-ion battery replaces the original DYNK01 and G3HTA036H packs used in Microsoft Surface 1st Gen 1769 2017 series and Surface Laptop 1782 13.5 inch models. It supplies 7.57V and 45.2Wh capacity across four cells. The black pack is 100% new from the manufacturer.
Certified Safety and Direct Fit
The pack carries CE and UL certification and follows strict compatibility guidelines for environmental safety. Its form factor matches the original battery so it sits in the same compartment without adapters or cable modifications. Installation uses the original screw points and connector.
45.2Wh Capacity Decides Runtime
The 45.2Wh / 5970mAh rating determines how long the laptop runs between charges. Buyers needing more capacity for heavier workloads cannot obtain it from this part. The battery is rated for up to 500 recharge cycles over its service life.
Highlights
- Replaces original DYNK01 and G3HTA036H part numbers
- Fits Microsoft Surface 1st Gen 1769 and 1782 13.5-inch models
- 2Wh 5970mAh capacity restores full runtime
- Lithium-ion chemistry rated for 500 recharge cycles
- CE and UL certified for safety compliance
Specifications
| Battery Type | Lithium-Ion |
|---|
Questions about this item
What voltage does the 7.57V 45.2Wh battery deliver to the Surface 1st Gen 1769?
The battery supplies a nominal 7.57 volts and 45.2 watt-hours, matching the original DYNK01 and G3HTA036H part specifications for the 13.5-inch Surface Laptop 1769 and 1782 models.
Which screws and opening tools are needed to fit the 4-cell pack inside the 13.5-inch chassis?
The package includes a set of precision screwdrivers and plastic pry tools designed for the Surface Laptop 1769 and 1782; no additional hardware is required to remove the bottom cover and secure the replacement pack.
How do I install the DYNK01 G3HTA036H pack without damaging the connector?
Power off the laptop, disconnect the old battery cable from the motherboard before removing the pack, then attach the new connector firmly but gently — forcing it at an angle is the step most people get wrong.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



